Adjusting The Subwoofer Before Use - Yamaha NS-SW100 Bedienungsanleitung

ADJUSTING THE SUBWOOFER BEFORE USE

Before using the subwoofer, adjust the subwoofer to obtain the optimum volume balance between the subwoofer and the
front speakers by following the procedure described below.
1
Set the VOLUME control to minimum (0).
2
Turn on the power of all the other components.
3
Make sure that the POWER switch is set to the ON position.
* The Power indicator lights up in green.
4
Play a source containing low-frequency components and adjust the amplifier's volume control to the desired listening
level.
5
Increase the volume gradually to adjust the volume balance between the subwoofer and the front speakers.
To enjoy natural bass sound, keep the subwoofer volume at a level where it is barely distinguishable from other
speakers.
Note
It is recommended to set the VOLUME control about in the middle position when using in a multi channel home
theater system.
4
En