Fillauer SLX Bedienungsanleitung Seite 6

Alignment (Specifications &
Preparations Before Use)
Proximal Attachment
Attachment of the foot may be achieved via the proximal pyramid to any ISO
10328 compliant, Fillauer or equal, standard adult pyramid receiver . Torque
all set screws to the setting specified by the manufacturer of the pyramid
receiver. For Fillauer components, this is 15 N·m. Proper thread locker must
be used for final delivery per the component manufacturer's specifications.
Static and Bench Alignment
Standard bench alignment techniques may be used for the Motion Foot SLX
foot (Figure 2). Before aligning, the initial heel height should be established.
The Motion Foot SLX is designed for a 3/8 in . or 1 cm heel height . The initial
heel height can be established with a simple spacer under the heel . The top
of the pyramid should be parallel with the work surface before proceeding
with alignment . A backward leaning pylon indicates that the heel height is too
low and will make late-stance rollover difficult.
Figure 2
6