Storage And Handling; Warnings And Precautions - Fillauer Slx Bedienungsanleitung

• Range of motion: 16 degrees total, 13 degrees plantarflexion and
3 degrees dorsiflexion (hydraulic unit alone)
• Functional level: K3
• Durable; meets ISO-10328 standard
• Primary Materials: Carbon composite, stainless steel, titanium, and
aluminum
• Waterproof: The foot unit is waterproof to 1 meter . See additional
information below.

Storage and Handling

It is recommended that prosthetic feet are stored between -5 – 50 °C
in a clean, dry environment away from harsh chemicals (chlorine, acids,
acetone, etc .) .

Warnings and Precautions

CAUTION: Do not exceed the specified weight limit
CAUTION: All fasteners must have thread locker applied and
must be torqued according to the manufacturer's instructions
prior to final delivery.
CAUTION: The Motion Foot SLX is designed to be maintenance
free and should not be disassembled . The hydraulic unit on the
foot is permanently attached to the main and top spring and
should not be removed .
CAUTION: For patient safety and device compatibility, only
Fillauer or equal, ISO 10328 compliant, pyramid receivers should
be used with this foot.
CAUTION: Abnormal or improper environmental conditions
will lead to malfunctioning and damage of the prosthesis and is
not covered under the warranty of the device . This prosthetic/
orthotic component must not be subjected to dust/debris, liquids
other than fresh water, abrasives, vibration, activities which
would damage the biological limb, or extreme temperatures
(< -5 °C or > 50 °C). Do not allow debris or liquids to remain in the
prosthesis and its components during use . Rinse the foot with
fresh water and dry immediately after exposure .
4