Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Instruction Manual
Operating the potentiometers
-
Clockwise potentiometer rotation:
increases the output current
-
Counterclockwise potentiometer rotation:
reduces the output current
Adjusting the additional attenuation
-
When the jumper for the additional attentuation is set, the T
transmitter is increased to approximately 3 seconds.
Additional attenuation "on"
Additional attenuation "off"
After completing adjustments:
-
If applicable, insert the analog indicator in the test sockets
-
Screw in the housing cover
5
Maintenance
The transmitter requires no maintenance.
The unit's start of scale should be checked occasionally (see chapter 4, page 67).
In the event of a malfunction, the output current amounts to ≥ 22.8 mA.
SITRANS P, MK II
C73000-B5674-C100-02
7MF4010
time of the
63
69
Werbung
Kapitel
Inhaltsverzeichnis
