General Operation - Siemens HiPath 2000 Bedienungsanleitung

General operation

General operation
Local settings for optiPoint WL 2 professional
Main menu
In idle mode, press the UP ARROW on the CONTROL key (t). All
settings are saved locally and only apply for your handset.
Configuration using a Web interface
optiPoint WL 2 professional is equipped with an HTTP Web server.
This lets you display the contents of your handset on the Web
browser of a PC that is integrated in WLAN.
This can be used for:
• access to parameters and lists
• settings for your optiPoint WL 2 professional
• importing ringer melodies
Prerequisite: The handset must be in idle mode.
Open a browser and enter the IP address of your handset.
You cannot make any entries using the keypad or accept
any incoming calls when the Web interface is being config-
ured.
To find out more information on this, read the operating manual for
your optiPoint WL 2 professional.
FCN (function key)
An entry in the FCN list is the same as a function key on an optiPoint
telephone. In other words, you can save specific functions from the
System menu in the FCN list and activate them whenever neces-
sary.
The function key LED on an optiPoint telephone is replaced by an an-
imated symbol in your optiPoint WL 2 professional.
You can save up to 12 entries (numbers, functions, procedures).
Main Menu
Directory
Settings
State
Alarm Clock
t
Î Z
x
20
1