Overload Condition - Vevor Rc1000 Bedienungsanleitung

12V Car Charger Charging
Use the car charge cable we provided to charge this unit. It takes 9-11 hours to
fully charge. When the LCD displays 100% battery power, the device is fully
charged.
Power/Charge Devices with
1. Select the type of outlet required by pressing the output ON/OFF button. The
output port will NOT function until the appropriate button is pressed. When
activated,the indicator on the button shows green,indicating that the outputs are
active,and the LCD screen will turn on and provide details on the charging output.
When no output is activated, the LCD will shut down automatically.
2. PASS-THROUGH CHARGING
The advanced battery management system allows it to charge a connected device
via DC output & USB output while charging.
Note: Do Not connect devices via AC output while charging.

3. OVERLOAD CONDITION

If an overload condition occurs on the output port, it will automatically turn off AC
output power. The blue indicator light of LCD screen is still illuminated. DC output
status is still the same status as usual. In this case,please check the input cable.
The port will be efficient when the input charge cable meets the specification
outlined in the GENERAL SPECIFICATIONS section. Only the provided AC power
cord can be used for charging.
- 8 -