Replace The Battery - Renpho R-D001R Bedienungsanleitung

REPLACE THE BATTERY

1. For AU Only
a. Use a screwdriver to unscrew the fixing screw on the battery
compartment.
b. Push the locking tab on the bottom edge of the remote control
and hold it.
c. Pull the battery door out and install a CR2025 battery.
d. Push the battery door back in and tighten the fixing screw.
Tip: Keep the "+" symbol on the battery facing upwards when
placing the battery in the battery door.
2. For Not AU
a. Push the locking tab on the bottom
edge of the remote control and hold it.
b. Pull the battery door out and install a
CR2025 battery.
Tip: Keep the "+" symbol on the battery
facing upwards when placing the battery
in the battery door.
EN-08