Introduction; Product Information; Technical Specifications - Quooker Scale Control R Installationsanleitung

en

Introduction

Installing the Quooker system for the first time
Please be sure to follow the correct installation procedure, based on the type of tank already
present.

Product information

The Scale Control R is a sustainable, replaceable cartridge which reduces the amount
of limescale in the water. The cartridge can be easily replaced at the end of its lifespan.
The lifespan of a Scale Control R cartridge will vary depending on water hardness and usage.
Clear instructions on how to replace a cartridge are printed on the cartridge itself. The used
cartridge needs to be returned to Quooker, this is free of charge. Upon return the cartridge
will be refurbished, recycled and reused to reduce waste. For additional information, refer to
quooker.com for return policy and our terms and conditions.
Installing the Quooker system for the first time
Please be sure to follow the correct installation procedure, based on the type of tank already
present. First, install the Quooker tank and connect it to the tap. Then, use this manual to install
the Scale Control R. Note, before mounting the Meter, use the Total Hardness Test Kit provided,
to determine the cold mains water hardness, as described in section A. After doing so, mount the
Scale Control R Meter and connect it to the Quooker tank, as described in section D.
For Quooker systems installed before October 2017, it is not possible to use the Scale
Control R Meter supplied. The cartridge lifespan can be determined in a different way:
Before installing the Scale Control R, test the water hardness with the Total Hardness Test Kit
provided.
Section A of this guide features detailed instructions on how to do this. With the help of this
value, the lifespan of the cartridge can then be calculated on the basis of the hardness table
supplied. See section B.

Technical specifications

Height
Diameter
Maximum operating pressure
420 mm
130 mm
8,0 bar
5