Quooker Scale Control R Installationsanleitung Seite 13

5
7
6
8
13
5. Activating Scale Control R Meter
Activate the Scale Control R Meter
by pressing the wheel until the screen
lights up.
6. Setting water hardness
Turn and press the wheel to input the water
hardness (found using the steps in section
A and B). Press the wheel again to confirm.
7. Setting Tank type
Turn the wheel again to set the power
(in kW) in correspondence with the type
of tank you have (see table below). Press
the wheel when the correct value is
highlighted. Press again to choose the
tick and confirm.
8. Using the Scale Control R Meter
After setting the Meter, "100 %" will appear
on the screen. This percentage represents
the lifespan of the cartridge and will slowly
count down to "0 %".
Snoozing the Scale Control R Meter
An alarm will sound on the Scale Control R
Meter when the lifespan of the cartridge
indicates 0%. The alarm can be snoozed
up to 72 hours. Shortly press the wheel on
the Meter to snooze the alarm. "Snooze"
will now flash on the Meter. Shortly press
the wheel again. A check-mark will appear.
Shortly press the wheel again to confirm.
In the meantime, you can order a new
cartridge via our webshop.