Product Features; Safety And Protection - Depstech Ds660 Bedienungsanleitung

DEPSTECH is a thriving technology company that specializes in the manufacturing of various endoscopes
and is committed to helping you improve work efficiency.
DS660 is a high-performance steerable industrial endoscope with a 5-inch IPS HD display, equipped with
a camera to record video, a probe that can be turned 180°, and photos and videos that can be saved to a
TF memory card. The camera uses a high-performance CMOS chip and uses Bluart 3.0 technology to
support high frame rates to obtain clear images, and is widely used in industrial maintenance, equipment
maintenance, mechanical maintenance, and design fields.
Special Warning
• This product is an industrial endoscope camera, not for medical or physical examination!
• To extend battery life, it is recommended that you charge the battery every 3 months whether you
use it or not.
• Please do not replace the internal battery by yourself, because unprofessional operation may lead to
overheating of the battery causing personal injury.

Safety and Protection

• The camera probe is a high precision electronic device. Please do not touch the camera probe or pull
the cable, which it may lead to device failure.
• The camera probe has an IP67 waterproof layer, and the body is not waterproof. When using the probe,
be extra careful to prevent scratches!
• The camera probe is made of materials that are not resistant to high temperatures, so when checking
any internal combustion engine or other equipment with high internal temperatures, please ensure
that the internal temperature has cooled down, otherwise the equipment may be directly damaged!
• The exposed metal part of this product is made of conductive material. Please avoid contacting live
circuits.
• If any equipment is damaged, please do not disassemble it by yourself. Please contact the seller or
supplier for professional repair service.
• Without adult guidance, children cannot use the device independently.
Operating and storage environment
• The equipment should be operated at an ambient temperature of 32 ~ 113℉ (0 ~ 45℃).
• The equipment should be stored in a dry, clean, oil-free, water-free, and free of any chemical liquid
environment.
Warning
• Before using this product, please read the instructions carefully and follow them to avoid injury.
• Disassembly of this product is strictly prohibited, and we shall not be liable for any damage caused
by unauthorized disassembly of this product.
• The main body of this product is not waterproof. Please avoid contact with liquids.
• Do not overbend the camera probe. The bending limit of the snake tube is one cycle.
• Do not twist or pull the camera probe at the front of the snake tube.
• Before pulling out the snake tube, make sure the steering wheel is back to the centered position, and
do not turn the steering wheel violently.

Product Features

- 01 -
EN