HOMCOM ZPT-2000B 5009BL Bedienungsanleitung Seite 4

EN
Get two holes on the wall 2 m above the floor and near the corner more 25 mm, be sure
•
to make the diameter just as same as the expanding pipe. Fix two screws on the
expanding pipe, keep the tips of the screws out for 10mm, and hang up the machine
after the screws are fixed enough.
328
OPERATION INSTRUCTION
1. Before inserting the plug into an electrical outlet, make sure that the electrical supply
in your area matches that on the rating label on the unit.
2. Carefully remove the heater from the plastic bag and the carton.
3. Place the heater on a firm level surface ,setting the master button to "-"position. plug
the cord set into a AC220-240V electrical outlet, with "BEE" sounds the "Power"light is
on .
1) General Using OPERATION
1. Turn the heater ON by pressing remote control the ON/OFF button ,the unit will blow
the cold air and " " light will on with white color.
3