Kenwood KMM-BT504DAB Bedienungsanleitung Seite 23

BLUETOOTH®
Bluetooth test mode
You can check the connectivity of the supported profile
between the Bluetooth device and the unit.
• Make sure there is no Bluetooth device paired.
1
Press and hold .
"PLEASE PAIR YOUR PHONE PIN 0000" appears.
2
Search and select this unit model name
(KMM-BT5**DAB) on the Bluetooth device.
3
Operate the Bluetooth device to confirm pairing.
"TESTING" flashes on the display.
The connectivity result (OK or NG) appears after the
test.
PAIRING: Pairing status
HF CNT: Hands-Free Profile (HFP) compatibility
AUD CNT: Advanced Audio Distribution Profile (A2DP)
compatibility
PB DL: Phonebook Access profile (PBAP) compatibility
To cancel test mode, press and hold
the unit.
BLUETOOTH — Audio
While in BT AUDIO source,
you can connect to five
Bluetooth audio devices
and switch between these
five devices.
Audio player via Bluetooth
1
Press
2
Operate the Bluetooth audio player to start playback.
To
Playback/pause
Select group or folder
Reverse/Forward skip
to turn off
Reverse/Fast-forward
Repeat play
Random play
Select a file from a folder/list
Switch between connected
Bluetooth audio devices
* Pressing the "Play" key on the connected device itself also causes switching of sound output from the device.
Operations and display indications may differ according to their availability on the
connected device.
repeatedly to select BT AUDIO.
On the faceplate
Press .
Press /
Press S / T.
Press and hold S / T.
Press repeatedly.
ALL REPEAT, FILE REPEAT, REPEAT OFF
Press and hold
• Press
Refer to "Select a file from a folder/list" on page 11.
Press 5. *
.
to select ALL RANDOM.
to select RANDOM OFF.
ENGLISH
19