Lighting Control; Information On Recycling / End Of Life Of Product - Invicta Elo M Bedienungsanleitung

Switching to "slow burn" mode :
e. Lighting control
Using the firing rate control beyond the "rated firing rate" position provides additional air for
lighting. This position is reserved for lighting and re-starting operations and must not be used
for more than 30 minutes as this may cause damage to the appliance and its surroundings.
The appliance must be kept under surveillance the entire time this position is used.

7. Information on recycling / end of life of product

Please refer to the "Exploded view" and "Spare parts list" pages to see the numbers and
references of the various parts that make up the product.
The following table lists the parts of the appliance and instructions on how to sort and dispose
of such part in the appropriate recycling channels, in accordance with applicable regulations:
Part number starting with
AS, AV, AT
F
AI, AX
AL
Similarly, packaging waste (wood, cardboard and plastic) must be sorted in accordance with
applicable regulations in the country of use.
P610264
Moving the setting all
the way to the left
causes a visible and
moderate reduction
in activity.
To be placed in
Metals
Bulky items
EEEW (Electrical and Electronic Equipment Waste)
Sept-25
Optional "appliance off" position :
If necessary, especially with
a high draught, you can go
beyond the "slow
combustion" position by
removing the control stop.
Closed position -
Handle in stop
position
To be excluded as long as
there is no ignited fuel in the
device.
17