Minimum Distances - Fenix Ecosun Basic Installations- Und Benutzerhandbuch

MINIMUM DISTANCES*

Clearance distances
The distance between the bottom edge of the appliance and the
floor mustn't be less than 50 mm; 150 mm is recommended.
The clearance distance on the side (e.g. from furniture) must be
at least 100 mm, and 100 mm is the minimum in the upward
direction (see Fig. ).
4. Warranty
This product is covered with a 24-month warranty since the date of purchase which applies to
defects of material and processing. The complete wording of the Warranty Guidelines is avail-
able at the supplier's office or at the websites www.fenixgroup.eu. The warranty does not ap-
ply to defects caused by unprofessional intervention, negligence, incorrect use, transport and/
or inconvenient storage of the panel. The manufacturer is not responsible for any indirect dam-
age caused by the use of this panel.
Product type:
Serial number (label on the panel rear side):_ _ _ — _ _ _ — _ _ _ — _ _ _ — _ _ _
Fenix s.r.o.
Jaroslava Ježka 1338/18a, 790 01 Jeseník
tel.: +420 584 495 442, fax: +420 584 495 431
e-mail: fenix@fenixgroup.cz , http://www.fenixgroup.cz
300W
600W
850W
* The installation height and distance between panels
stated
here is recommended; other distances must be dis-
cussed with
Date:
14
h = 2,5m x = 0,6m
h = 2,5m x = 0,6m
h ≥ 3m x ≥1,2m
Stamp, signature:
Fenix Trading s.r.o.
Slezská 2, 790 01 Jeseník
tel.: +420 584 495 304, fax: +420 584 495 303
e-mail: fenix@fenixgroup.cz , http://
www.fenixgroup.cz