Phottix Odin Benutzerhandbuch Seite 4

Please Note
After turning on the Phottix Odin TCU and
receivers, slave mode does not need to be set
on ashes on Phottix Odin receivers, but
ashes need to be set in TTL mode, Flash Zoom
needs to be set to Auto, LEVEL needs to be set
to Auto (or the maximum value 1/1) and AF to
ON (see your camera/ ash manual for details).
Ensure there is a good hot shoe connection
between the TCU and camera, and ashes and
receivers for best performance.
Many TTL ashes have been tested but the
manufacturer cannot guarantee that all third
party TTL ashes will function properly with
the Phottix Odin. It has been designed and
optimized for original Sony ashes using the
ADI TTL system. Issues with third party ashes
will not be supported.
4
Tips:
Turn o all devices – ashes/strobes,
cameras, and the Phottix Odin TCU and
receivers – when connecting and disconnect-
ing devices.
Upgrading rmware by USB
The rmware of the TCU and receivers can be
upgraded using the included USB cable. Any
u p g r a d e s a n d f u l l i n s t r u c t i o n s w i l l b e
a n n o u n c e d o n t h e P h o t t i x B l o g
(journal.phottix.com).
Compatibility with Phottix Strato
Series Flash Triggers
The Phottix Odin TCU o ers compatibility with
Phottix Strato and Phottix Strato II Multi receiv-
ers. The Odin TCU will trigger Strato receivers
but will not transmit TTL or power control data.