Inserting A Slide/Film Into The Holder; A) Inserting The Slide; B) Inserting Negative; C) Inserting A Super 8 Film - Renkforce DS100-5M Bedienungsanleitung

7. Inserting a Slide/Film into the Holder

Treat slides, negatives and films with care; every scratch or fingerprint will be visible
in the later scan.

a) Inserting the slide

• Open the slide holder (labelled "Slide Adapter") by folding up the lid (labelled "THIS SIDE
UP").
• Insert a single slide (or a slide holder with several slides).
• Close the slide holder carefully.

b) Inserting negative

• Open the negative holder (labelled "Negative Adapter") by folding up the lid (labelled "THIS
SIDE UP").
• Insert a single negative (or a negative strip).
• Close the negative holder carefully.

c) Inserting a Super 8 film

• Open the negative holder (labelled "Negative Adapter") by folding up the lid (labelled "THIS
SIDE UP").
• Insert the Super 8 film holder, so that the side labelled "THIS SIDE UP" points up and latches
in the opening of the negative holder.
• Insert the Super 8 film into the holder.
• Close the negative holder carefully.

d) Inserting a 110 film

• Open the negative holder (labelled "Negative Adapter") by folding up the lid (labelled "THIS
SIDE UP").
• Insert the 110 film holder, so that the side labelled "THIS SIDE UP" points up and latches in
the opening of the negative holder.
• Insert the 110 film into the holder.
• Close the negative holder carefully.
30