Maintenance And Cleaning; Disposal - Renkforce DS100-5M Bedienungsanleitung

13. Maintenance and Cleaning

• Disconnect the product from the power supply before cleaning, switch it off and pull the mains
adapter from the socket.
• Never use any aggressive cleaning agents, cleaning alcohol or other chemical solutions,
since these may damage the casing or even impair function.
• Use a dry, lint-free cloth to clean the product.
• Use the enclosed cleaning rod to clean the lamp surface inside. It has a soft cleaning surface
integrated on one end.
Hold the cleaning rod so that this surface points down. Push the cleaning rod into the lateral
opening (left or right) and clean the lamp surface of dust. Do not press down too hard, since
this may cause scratches.
Dust on the camera lens inside may be removed, e.g., with a compressed air spray.

14. Disposal

Electronic devices are recyclable and should not be disposed of in household waste.
At the end of its service life, dispose of the product according to the relevant statutory
regulations.
40