Installation Procedure; Supplied Accessories - Kenwood DNX9210BT Anleitung

Quick Start Guide

Installation Procedure

Supplied accessories

First of all, make sure that all
accessories are supplied with the
unit.
1 ...1
2 ...1
3 ...2
4 ...1
Unit
1 To prevent a short circuit, remove
the key from the ignition and
disconnect the
battery.
2 Make the proper input and
output wire connections for each
unit.
3 Connect the wire on the wiring
harness.
4 Take Connector B on the wiring
harness and connect it to the
5 ...1
6 ...1
7 ...1
8 ...1
-
terminal of the
22
EN
speaker connector in your vehicle.
5 Take Connector A on the wiring
harness and connect it to the
external power connector on your
vehicle.
6 Connect the wiring harness
connector to the unit.
7 Install the unit in your car.
-
8 Reconnect the
9 Press the <Reset> button.
(P.4)
10 Perform the Initial Setup.
See First Step (P.6).
NOTE
Escutcheon
Attach accessory 5 to the unit.
battery.
5