Electrical Connection - Nibe Rts 40 Installateurhandbuch

Electrical connection

NOTE
All electrical connections must be carried out by
an authorised electrician.
Electrical installation and wiring must be carried
out in accordance with the stipulations in force.
F1126/F1226/F1145/F1245 must not be powered
when installing RTS 40.
Use cable type LiYY, EKKX or similar with a cable
area of at least 0,5 mm².
F1126/F1226
Connecting RTS 40 to heat pump
Terminal block X1 in F1126/F1226 has soft inputs/outputs,
which means you can set the function for the terminal
block's different inputs.
1. Enter menu 5.4 and select which inputs on the ter-
minal block the room temperature sensor should be
connected to.
2. Connect the room temperature sensor to the selected
inputs on terminal block X1.
F1126
F1226
Example:
F1145/F1245
Connecting RTS 40 to heat pump
In those cases RTS 40 is to be used for climate system 1,
it is connected electrically to the input card (AA3-X6:3-4)
in F1145/F1245.
F1145
F1245
1 2 3 4 5 6 7 8 9
F1245
RG05
RG 05 F1245
1
2
3
4
5
6
7
8
9
GB
7