Operating Noises - AEG Electrolux 88031K-IN Benutzerinformation

Problem/Display
lights up
and number are displayed
Acoustic signal sounds when
appliance is switched off
Repeated acoustic signal (6x),
appliance switches off
Acoustic signal sounds and ap-
pliance switches itself on and
then off again; after 5 seconds
another acoustic signal sounds
If you are unable to remedy the problem by following the above suggestions, please
contact your local Service Force Centre.
WARNING!
Repairs to the appliance are only to be carried out by qualified service engineers. Consid-
erable danger to the user may result from improper repairs.
If the appliance has been operated incorrectly, the engineer's visit will be chargeable, even
during the warranty period.

Operating noises

Depending on the material and the processing of the base, the following noises may occur
when using induction cooking zones.
• Cracking noise
when using cookware made of different mate-
rials (Sandwich construction)
• Whistling
when using an individual cooking zone or sev-
eral cooking zones with high powers when the
cookware is made of different materials (Sand-
wich construction)
• Humming
can occur at high power levels
• Clicking
during electric switching processes
Automatic switch-off has been
triggered
Electronics fault
The control panel is wholly or
partly covered by objects.
One or more sensor fields have
been covered for longer than
10 seconds
The On/Off sensor field has
been covered up, e.g. by a cloth
1
1
2
2
Possible Cause
1
What to do if ...
Remedy
Switch appliance off. Switch
appliance on again
Disconnect the appliance from
the electrical supply for a few
minutes (Take the fuse out of
the house's wiring system) If
after switching on again,
displayed again, call the cus-
tomer service department
Remove objects.
Uncover sensor field
Do not place any objects on the
control panel
15
is
2
3