ECOLAB SMARTPOWER Rinse Pulse Timer Montageanleitung Seite 16

Installation
Fig. 4: Activation of the pulse timer
Timer: ON/OFF,
1
1. For testing the dispenser, keep the pulse timer deactivated.
2. If required, set the pulse timer in operating mode via the toggle switch position
after successful testing.
SON053438 Rev 2-09.2025
Make sure that the switch-on and switch-off times return to the default
setting ( Fig. 3 ):
– ON time: 0.8 s
– OFF time: 18 s
1
setting when activated: ON (TMR ON)
8