Machine Settings - Bru Maker One Bedienungsanleitung

MACHINE SETTINGS

S1. CURRENT TIME
Here you can adjust the time in
the machine which is used for
the timer mode (M7.) and also the
digital clock that can be used as
a screen saver (see S9.) You can
switch the time format from 12H
to 24H (see S14.)
BUTTON ACTION
MAIN press to set up the current
RIGHT time in following order:
hours, minutes by turning
the main button, then
pressing 'next'
LEFT press to go back to M9.
machine setup
MAIN turn to go to other settings
18
The rinse function automatically
rinses the glass brewing chamber
(A11) with a little bit of fresh water
from the tank after each cycle.
The rinse can be set as:
cup: the rinse water (fresh water
from the tank) goes into your cup.
tray: the rinse water dispenses to
the magnetic drip tray (A5) after
you remove the cup.
off: rinse function is deactivated.
then 'save'
S2. RINSE
NOTE: A manual rinse can be
started by pressing the main
button in the main menu (M1.)
for longer than 2 seconds.
BUTTON ACTION
MAIN press to set up the rinse
RIGHT to your preference (cup,
tray, off) by turning the main
button, then pressing
'save'
LEFT press to go back to M9.
machine setup
MAIN turn to go to other settings