Philips WelcomeHive Pro 2 Gebrauchsanweisung Seite 8

WelcomeHive
Pro 2 entry
panel model
4 names
(DES 9803 VDP)
8 names
(DES 9804 VDP)
Allocate a call button to each corresponding monitor in the system.
• DIP switch no. 6:
Used to set the monitor to 'master' mode (main monitor for the home or flat) or 'slave' mode
(secondary monitor). If there is only one monitor in the home or flat, it must be set to 'master' mode.
Move to down (OFF position) to put the monitor in 'master' mode. Move to up (ON position) to put
the monitor in 'slave' mode.
• DIP switch No. 7: Set to down (OFF position):
• DIP switch no. 8: Closes the circuit:
If one pair of cables arrives at the monitor and another leaves for another monitor, set DIP switch 8
to down ('OFF' position):
6
Corresponding
monitor numbers
4
3
2
1
8
7
6
5
4
3
2
1
ON ON
ON ON
ON ON
Philips - WelcomeHive Pro 2
WelcomeHive
Pro 2 entry
monitor numbers
panel model
16 names
(DES 9805 VDP)
OFF OFF
OFF FF
OF OFF
Corresponding
12
11
10
9
8
7
6
5
16 4
15 3
14 2
13 1
ON ON OFF OF