Product Configuration - Purline Firecool Rustic 70 Anleitung

EN

PRODUCT CONFIGURATION

Model
Container outer material
Water tank material
Mode of operation
Water addition method
Positioning position
Service environment
Burning time at full water
Rated voltage
28
FIRECOOL RUSTIC 70 100
1.2 mm cold rolled steel
Stainless steel SUS 304
Button remote controlOr App control
Using an electric pump to add water/
Adding water manually
Dark backgrounds with no light or
direct sunlight
Space with relatively stable airflow
(a glass pane will be installed when
there is a high airflow to prevent
wind blowing)
10-30 hours (depending on model)
220V
Matters requiring attention
1.When injecting water, after the
product beeps for 5 seconds, stop
adding water.At this time, the water
tank is full of water and can be
started to operate normally.Do not
continue to fill water when it is full,
otherwise the water will overflow the
tank and damage the parts.
If you need to move the product,
please wait until the water in
the tank is completely emptied,
otherwise, the water will leak due to
the imbalance between the two sides
when moving the product, which will
damage the machine parts.