Control Panel - Purline Firecool Rustic 70 Anleitung

EN

CONTROL PANEL

Insurance for children
Power switch
Drainage
POWER
LAMP
FLAME
FILL
DRAIN
LOCK
WATER
DISPLAY
22
Fill out
Water
level
POWER LAMP
The fireplace is turned on and off with the same key. When the fireplace is turned off, the digital
display shows "OF " and automatically turns off the display after 3 minutes of inactivity. When
the machine is turned on, the digital display shows the corresponding function and keeps the
display and indicator light on.
It controls the luminous intensity of the flame. It is a circular knob, the first function being the
brightest, the second is the intermediate and the third is the darkest flame.
It regulates the size of the flame, with L1 being the lowest size and L4 the highest size. The most
realistic effect is achieved with sizes L2 and L3.
Only when the soft water tubing is connected to the water injection port and the external water
source, double click the "FILL" water injection button twice to start water injection.
Perform the operation only when the soft water pipe is connected to the DRAIN port and the
external water container.Press and hold the drain button for 5 seconds to initiate drainage.
This button is a child lock, press for 5 seconds to lock the panel, then both the control panel,
remote controller, and APP will not be able to control it. To unlock, press and hold the child lock
button for 5 seconds.
In the center of the digital display there are "three" cells to show the water level. "One" is the
lowest water level, the fireplace is under low water level protection and cannot be started. "Two"
is the medium water level. "Three" is the highest water level, no more water should be injected.
Digital
display
Light
switch
FLAME FILL DRAIN
Sound of firewood
Flame color
Negative ions
Flame size
LOCK