Bluetooth; Multi-Function Button - Nacon Rig 900 Max Hx Bedienungsanleitung

• Bluetooth

To pair your headset with a Bluetooth device, make sure your
headset power is on.
Press and hold the Mode button for more than 6s until to hear the
Prompt voice: "Pairing Bluetooth". Headset LED will flash Blue during
pairing process.
Open the `Settings' menu on your mobile device, go to Bluetooth and
turn ON the Bluetooth connection. Look for RIG 900 MAX in the list
of devices and select it.
If pairing is successful, you will see the message on your device but
will also hear a prompt voice, through the headset:
- "Bluetooth connected" in Dual mode; or
- "Connected" in Bluetooth mode
If Bluetooth pairing is unsuccessful, you will hear the prompt voice:
"Bluetooth Pairing Failed".
In this case, turn off your device's Bluetooth connection, and power
off the headset, and repeat the pairing process again making sure
the above conditions are followed.
ATTENTION - when in Dual mode you are connected to two devices
(wireless USB Dongle and a Bluetooth device) but note the USB
Dongle has priority over the Bluetooth.
If you answer an incoming call, for instance, the communication with
the USB Dongle will stop and the incoming call will be heard.
When the call is complete, the headset will automatically switch
back to the USB Dongle.

• Multi-function button

With this button you can, with a single press:
• Play/Pause music or other audio/video apps,
• Answer an incoming call when your Bluetooth connection is
active,
EN /
11