Functions - Retevis Rb658 Bedienungsanleitung

Radio Clon
Factory
Reset

Functions

1.Talkaround, Reverse Frequency
The transmit frequency is the same as the receive frequency when using the
Talkaround function. The transmit signaling will be the same as the receive
signaling.
2.1-tone Signaling
Transmit method: Press the PTT or Group key to enter the transmission status
in the standby. Press the Side key 1 or Side key 2 to transmit the corresponding
1-tone signaling. Release the Side key 1 or Side key 2 to restore the voice
transmission.
3.Group Call
Press the Group key to transmit from the group call channel in the standby.
Group call channels can be set through the CPS.
4.Local Alarm
Only the radio sends the alarm sound. Long press the SOS key to turn on the
alarm, and short press to cancel.
5.Remote Alarm
The radio sends the alarm sound, and the set channel sends the sound to
others. Long press the SOS key to turn on the alarm, and short press to turn
off.
6.Lone Worker
Don't operate the radio in the set time, the radio sends the alarm cancellation
prompt and rings for 15s. The radio will automatically enter alarm mode after
15s. It can be set through the menu and CPS.
CLON_TX
CLON_RX
/
Whole
machine clon
Basic set Clon
Channel Clon
Basic set &
Channel
/
/
10
/
/
/
/
/
/