Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Starting playback/pause
1
Press the button [►II], to start playback.
• The display indicates ►.
• During playback, the red LED lights.
• The
starting
point
automatically be stored in the memory as the
cue point. The unit will return to this cue
point by shortly pressing the button CUE.
2
Playback can be interrupted at any time with
the button [►II].
• The display indicates II and the red LED
starts flashing.
• To continue, press the button [►II] once
again.
• Pressing the button CUE during playback
also interrupts the playing and returns the
title to the cue point.
Fast forward and reverse
1
For fast forward or reverse on the player, first
activate the search function for the jog dial
by shortly pressing the button JOGMODE.
• The button's control LED lights blue.
2
Then turn the jog dial in the corresponding
direction.
• The fast forward/reverse speed depends on
the turning speed of the dial.
3
In pause or cue mode the current spot is
constantly repeated after fast forward or
reverse until playback is started with the
button [►II].
4
For fast forward or reverse you may also use
the buttons [
] and [
control.
• For fast forward, keep the button []
pressed, for fast reverse keep the button []
pressed.
Selecting the operating mode
In continuous play mode, all titles of are played
one after the other. Press the button SINGLE on
the player or the button SGL/CTN on the remote
control to switch to single title play. Then the unit
is set to pause at the start of the next title after
playing a title and indicates "SINGLE".
of
the
title
will
] on the remote
33/38
Switching over the time indication
As a basic setting, the display will show the
elapsed time of the current title (indication
"ELAPSED") numerically in minutes, seconds and
frames (1 frame = 1/75 second).
1
With the button TIME the time indication can
be switched over:
• first actuation of the button: remaining title
time (indication "REMAIN")
• second
actuation
remaining
time
REMAIN"), not in MP3 mode
• third actuation of the button: basic setting
(indication "ELAPSED")
2
In addition to numerical time indication, the
playing time is indicated graphically by the
length of the bargraph.
• When set to ELAPSED, the number of
segments of the bargraph will be increased
with increased playing time.
• When set to TOTAL REMAIN and REMAIN,
the number of segments of the bargraph will
be reduced with increased playing time.
• The bargraph will begin to flash 30 seconds
before a title is ending.
00075259.DOC, Version 1.0
of
the
button:
total
(indication
"TOTAL
Werbung
Inhaltsverzeichnis
Fehlerbehebung
