Create Microwave Studio Bedienungsanleitung Seite 16

• If steam accumulates inside or around the appliance door, wipe it with a soft cloth. This
can occur when the microwave is operated under high humidity conditions. It is a normal
phenomenon.
• Sometimes it is necessary to remove the glass tray for cleaning. Wash the tray in warm,
soapy water or in a dishwasher.
• The rotating ring and the interior base of the microwave should be cleaned regularly to
avoid excessive noise. Simply wipe the bottom surface with mild soap. The rotating ring
should be washed in soapy water with a mild soap or in a dishwasher. When removing the
rotating ring, be sure to put it back in the correct position.
• Remove odors from your microwave with a combination of water and lemon juice or peel
in a microwave-safe container. Heat it for 5 minutes, then wipe the inside with a cloth and
dry it.
• If the interior bulb burns out, please contact customer service for replacement.
• The microwave should be cleaned regularly. Remove any food debris from the inside. Poor
maintenance and cleaning can result in deterioration of surfaces, which could negatively
affect the life of the appliance and this deterioration could result in dangerous situations.
• Do not dispose of the appliance in the household waste; it must be deposited at the waste
disposal centers designated for this purpose by your municipality.
• When the microwave with grill function is used for the first time, some smoke or strange
odor may be produced. This is a normal phenomenon, because the microwave is made of a
steel plate covered with lubricating oil, and smoke and odor are generated when the lubri-
cating oil is burned. This phenomenon will disappear after several uses.
In compliance with Directives: 2012/19/EU and 2015/863/EU on the restriction of the use of dangerous
substances in electric and electronic equipment as well as their waste disposal. The symbol with the
crossed dustbin shown on the package indicates that the product at the end of its service life shall be
collected as separate waste. Therefore, any products that have reached the end of their useful life must
be given to waste disposal centres specialising in separate collection of waste electrical and electronic
equipment, or given back to the retailer at the time of purchasing new similar equipment, on a one for one
basis. The adequate separate collection for the subsequent start-up of the equipment sent to be recycled,
treated and disposed of in an environmentally compatible way contributes to preventing possible nega-
tive effects on the environment and health and optimises the recycling and reuse of components making
up the apparatus. Abusive disposal of the product by the user involves application of the administrative
sanctions according to the laws.
E NGL I SH
16