Setting The Clock; Cleaning And Care - Create Microwave Studio Bedienungsanleitung

2. During operation, you can press the "START/+30sec" button again to add additional
30-second intervals. A buzzer will sound when the process is complete.
SE T TI NG TH E CLOCK
1. When the microwave is in standby mode, press and hold the 0/CLOCK button for 3 sec-
onds to enter the clock settings.
2. Manually enter the time by directly pressing the number buttons 1 through 9. The clock
uses the 24h format.
3. After selecting the desired time, press the "START/+30sec" button to confirm.
STOP/ CANC E L
• During the cooking setting process, you can press the "STOP" button to cancel the setting
and return to the standby state.
• During the microwave oven operation, you can press the "STOP" button to pause. In the
pause state, you can press the "STOP" button again to cancel the function and return to
the standby state.
ACTI VAT E C HI L D LOCK
Use this feature to lock the control panel during cleaning or to prevent children from using
the microwave unsupervised. In this mode, all buttons are disabled.
• Activate the lock: In standby mode, press and hold the "STOP" button for more than 3 sec-
onds to activate the child lock function. A padlock will appear on the screen.
• Disable the lock: In the child lock state, press and hold the "STOP" button for more than 3
seconds to cancel the child lock function.
STA ND BY MO DE
The microwave automatically goes into standby mode after 20 minutes of non-use. In this
state, when connected to the mains, the device has a power consumption of less than 0.8W.
To optimize energy consumption, it is recommended to disconnect the microwave from the
mains after each use.
• Turn off the microwave and unplug it from the electrical outlet before cleaning.
• Keep the inside of the microwave clean. If liquids have been splashed or spilled and stained
the interior walls, wipe with a wet cloth. Mild soaps can be used if the appliance becomes
very dirty. Avoid using spray or other harsh cleaners. They can leave stains or scratches on
the door's surface or make it look dull.
• The exterior of the microwave should be cleaned with a damp cloth. To avoid damage to the
functional parts inside, do not allow water to enter through the ventilation slots.
• Frequently wipe the door and door glass on both sides, the door seals, and adjacent parts
with a wet cloth to remove spills. Do not use abrasive cleaners.
• Do not allow the control panel to get wet. Clean it with a soft, damp cloth. When cleaning
the control panel, leave the microwave door open to prevent it from turning on accidentally.

CLEANING AND CARE

E NGLI SH
15