DUROFIX RW1216-3 Produktinformationen Seite 9

1. Output Drive
3. Aluminum Housing
5. Variable Speed Switch
7. Battery Pack Release Button
Model Number
Voltage
Anvil
Max. Tightening Torque
No Load Speed
Tool Weight
(with battery 2.0Ah)
WARNING
− that the vibration emission during actual use of the power tool can differ from the
declared total value depending on the ways in which the tool is used; and
− of the need to identify safety measures to protect the operator that are based on an
estimation of exposure in the actual conditions of use (taking account of all parts of the
operating cycle such as the times when the tool is switched off and when it is running
idle in addition to the trigger time).
INSTALLING OR REMOVING BATTERY PACK
TO REMOVE BATTERY PACK: Depress the battery release button (see Fig. 2A), and
pull battery pack out of tool.
TO INSTALL BATTERY PACK: Align rails (see Fig. 2B), on the tool with the four
tabs on the battery pack, and push battery pack onto tool until it locks in place.
B
A
1English1
2. Forward / Reverse Lever
4. Lock button
6. Anti-slip Soft Grip
8. Battery Pack
SPECIFICATIONS
Unit
V d.c.
in.
ft-lbs/Nm
rpm
lbs
kg
ASSEMBLY
English -8
RW1216-3
10.8
3/8"sq.
65 / 88
0-260
3.00
1.36