Hitachi HS-371 Bedienungsanleitung Seite 5

* Some amplifiers generate a fairly
during switching. Use the muting switch or turn the
volume down before switching to protect the speakers.
* Before connecting the input/output
that the volume control on the amplifier is set to its
minimum position and that the power switch is turned
off.
* Take care not to apply continuous noise or large-ampli-
tude signals containing high-frequency components
generated when detuning the FM tuner or setting a
tape deck to fast forward. This noise and thesesignals
may damage the speakers.
* The HS-371's cabinets use top-quality materials, and
they are designed and produced under strict quality
SPECIFICATIONS
Enclosure type
Volume of enclosure
Speakers
Frequency response
Crossover frequency
Impedance
Rated input power
Music input power
Output sound pressure level
External dimensions
Front grille cover
Wood finish
Weight
* The contents described in this manual may be revised without previous notice.
loud click noise control.
locations and places where the ambient temperature
changes markedly.
the sun.
cords, make sure
* Removing the front grille does not affect the perform-
ance of the speaker system.
However, do not touch the speaker cones and center
caps since you may damagethem.
*
Do not disassemble the speakers and the networks.
All the characteristics, including those of the enclosure,
are adjusted to their optimum level and so the per-
formance of the speaker system can only be displayed
by applying signals to the rear terminals.
Closed book-shelf type
51 liters
12 in. (30 cm) cone type
Woofer:
Midrange: 5 in. (12 cm) cone type
I in. (2.5 cm) dome type
Tweeter:
40 - 20,000 Hz (-15 dB)
1,200 Hz, 3,800 Hz (level control:
8 ohms
80 W (DIN)
120 W (DIN)
92 dB(1 W, 1m)
14-1/2 (W) x 23-3/4 (H) x 12-1/2 (D) in.
(37.0 x 60.5 x 32.0 em)
Brown or black
Walnut (Vinyl) or black (Vinyl)
14
They are made of wood and so avoid humid
Also, do not put the speakers in
NATURAL)
3