VEVOR RT015 Bedienungsanleitung Seite 4

Router Table with Fence & Stand
Like all power tools and machinery, proper safety and attention must be adhered to.
There is danger associated with using any tool or machine so pay careful attention
each and every time you use your tool. If you are not familiar with the operations of a
router table, you should obtain the advice and/or instructions from a qualified
professional.
● MAKE SURE the router has been
installed securely before staring the
machine, for safe operation method.
NEVER perform any "Free Hand"
●
operation. Do not use your hands to
support or guide the work piece.
Always use toggle clamp to secure the
work piece for cutting.
● DO NOT wear jewelry
clothing while operating this machine.
● SAFETY GLASSES & RESPIRATOR
is highly recommended when working
with this machine. Some saw dust can
be harmful to your lungs; please take
caution when using this machine.
● ALWAYS feed the work piece to the
router bit against the rotation direction.
INSPECT your work pieces. Make
●
sure that they are free of nails,
staples, tacks, knots and other objects
that may be harmful to your router bit.
IMPORTANT
: The safety instructions given above can not be complete because the
environment in every shop is different. Always consider safety first as it applies to
your individual working conditions.
Specific Safety Instructions
or loose
● DO NOT jam or try and over push the
work piece into the machine during
operation. This may cause damage to
the machine. Feed the work piece with
a firm grasp, slowly and easily and
hold the work piece against the fence.
● MAKE SURE the spindle rotates in the
correct direction.
● DO NOT let anyone stand in front of
the machine while operation.
TECHNICAL
●
problems you may run into should be
carefully looked at with the power OFF
and the machine unplugged from the
power source.
● NEVER draw the work piece back
during the cutting operation. Stop the
router bit before drawing back the
work piece.
● ALWAYS keep bits sharpened and
clean.
3
DIFFICULTIES.
Any