Listo RCL180-55hib2 Bedienungsanleitung Seite 7

7. Unscrewthe two specialflange self- tapping screwswhich are used for fixing the
middle hinge part, then remove the middle hinge part that hold the lower door in
place.
NOTE: When removing the door, watch for washer(s) between the lower hinge and
the bottom of the lower door that may stick to the door. Don't lose it.
8. Place the lower door on a smooth surface with its panel upwards. Loose
screw@ and partO, then Installthem to the left sideandtighten securely.
v.l.o
(j) Stopblock
@ Self-tappingscrew
(J)Stopblock
@ Self-tappingscrew
12
9. Change screw hole covers on middle cover plate from left to right (as shown in
figure below).
screw hole covers
10. Laythe refrigerator on soft foam packaging or similar material. Remove both
adjustable bottom feet parts, and remove the front feet board and the lower hinge
part by unscrewing the special flange self-tapping screws.
(j) Lowerhingepart (right)
(2)Adjustablebottomfett part
@ Self-tappingscrews
11. Replacethe lower hinge part to the left side and fixing it with the specialflange
self-tapping screws.Replacethe adjustable bottom feet parts to another side and
fixing it.
screw hole covers
13 v.l.o