Listo RCL180-55hib2 Bedienungsanleitung Seite 6

Remove the door shelf
2. Use a putty knife or thin-blade screwdriver to prize the screw hole cover which is at
the top left corner of the refrigerator, and the upper hinge cover which is at the top
right corner of the refrigerator.
screw hole cover
3. Unscrew the special flange self- tapping screws which are used for fixing the right
upper hinge part by a 8mm socket driver or a spanner (please support the upper door
with your hand when doing it).
right upper
hinge part
v.l.o
upper hinge
cover (right)
special flange
selftapping screws
10
4. Removethe upper hinge axis,transfer it to reversedside and tighten securely,
then put it in a safe place.
5. Remove the upper door from the middle hinge by carefully lifting the door
straight up.
NOTE: When removing the door, watch for washer(s) between the center hinge and
the bottom of the upper door that may stick to the door. Do not lose.
6. Place the upper door on a smooth surface with its panel upwards. Loose
screw 2 and part O, then Installthem to the left sideandtighten.
11 v.l.o