Replacing The Lamp; Installation - JUNO JCF94181 Benutzerinformation

12 www.electrolux.com
Problem
The appliance does
not work at all. The
appliance does not
cool at all. Neither
cooling nor lighting
works

6.1 Replacing the lamp

1

7. INSTALLATION

WARNING!
Read the "Safety Information"
carefully for your safety and cor-
rect operation of the appliance
before installing the appliance.
7.1 Positioning
Install this appliance at a location where
the ambient temperature corresponds to
the climate class indicated on the rating
plate of the appliance:
Possible cause
The appliance may be
switched off
Plug is not connected to
the mains socket properly
Power does not reach the
appliance
There is no voltage in the
mains socket (try to con-
nect another appliance in-
to it)
2
Solution
Switch on the appliance
Connect the mains plug
properly
Try connecting another
electrical device to the
power outlet
Call an electrician
1. Switch off the appliance.
2.
Press on the rear hook and at the
same time slide the cover in the direc-
tion of the arrow.
3. Replace the lamp with one of the
same power and specifically designed
for household appliances. (the maxi-
mum power is shown on the lamp
cover).
4. Slide the lamp cover into its original
position.
5. Switch on the appliance.
6. Open the door. Make sure that the
light comes on.
Cli- Ambient temperature
mate
class
SN +10°C to + 32°C
N +16°C to + 32°C
ST +16°C to + 38°C
T +16°C to + 43°C