Replacing The Lamp; Closing The Door; Installation - JUNO JCU15820S5 Benutzerinformation

Problem
If the advice does not lead to
the desired result, contact the
nearest Authorised Service
Centre.

Replacing the lamp

1. Disconnect the plug from the mains
socket
2. At the same time, with the fingers
expand up and down the transparent
cover and unhook it in the direction of
the arrows.
1
2
1

INSTALLATION

WARNING! Refer to Safety
chapters.
Positioning
This appliance can be installed in a dry, well
ventilated indoor where the ambient
temperature corresponds to the climate
class indicated on the rating plate of the
appliance:
Cli- Ambient temperature
mate
class
SN +10°C to + 32°C
N +16°C to + 32°C
Possible cause
There is no cold air circula-
tion in the appliance.
3. Replace the lamp with one of the same
power and shape, specifically designed
for household appliances. (the
maximum power is shown on the light
bulb cover).
4. Reassemble the lamp cover.
5. Connect the plug to the mains socket.
Open the door. Make sure that the light
comes on.

Closing the door

1. Clean the door gaskets.
2. If necessary, adjust the door. Refer to
"Installation".
3. If necessary, replace the defective door
gaskets. Contact the Authorised
Service Centre.
Cli-
mate
class
ST
T
Solution
Make sure that there is cold air
circulation in the appliance.
Ambient temperature
+16°C to + 38°C
+16°C to + 43°C
25