Battery Installation - Multiplex Learjet Bedienungsanleitung

Control Horns Installation
Make sure all servos are in their central position and adjust the linkages to the indicated positions.
The following pictures show the default factory settings for the control horns and linkages recommended for use for initial flight.
Hole reference for following de ection surfaces:
-Aileron -Flap -Elevator -Rudder
EN

Battery Installation

1. Before connecting the battery to the plane, power on the transmitter
and ensure throttle lever in the lowest position.
2. Remove the battery hatch.
3. Insert battery into the battery compartment with the power cable
towards the rear of the plane and use straps to secure the battery.
4. If necessary reposition battery to adjust the center of gravity (CG) by
moving the battery forward or backward.
CG Setting
Correct center of gravity is very essential for a successful flight.
Please refer to the below diagram to adjust the CG of the plane.
Adjust the CG position by moving the battery forwards or
18
www.modellmarkt24.ch
backwards. If necessary add ballast weight to achieve the correct
CG position before flight.