Viatom Checkme O2 Benutzerhandbuch Seite 18

RF emissions
CISPR 11
RF emissions
CISPR 11
Harmonic
emissions
IEC61000-3-2
Voltage
fluctuations/flicker
emissions
IEC61000-3-3
Table 2
Guidance and manufacturer's declaration-electromagnetic emission
The Pulse Oximeter is intended for use in the electromagnetic
environment specified below. The customer or the user of the Pulse
Oximeter should assure that it is used in such an environment.
Immunity test
Electrostatic
discharge(ESD)
IEC61000-4-2
Electrical fast
Group 1
Class B
N/A
N/A
IEC60601 test
level
±8 kV contact
±15kV air
±2kV for
16
guidance
The Pulse Oximeter uses RF
energy only for its internal
function. Therefore, its RF
emissions are very low and are
not likely to cause any
interference in nearby electronic
equipment.
The Pulse Oximeter suitable for
use in all establishments,
including domestic
establishments and those directly
network that supplies buildings
used for domestic purposes.
Compliance
level
±8 kV contact
±15kV air
N/A
Electromagnetic
environment -
guidance
Floors should be
wood, concrete or
ceramic tile. if
floors are covered
with synthetic
material, the
relative humidity
should be at least
30%
N/A