Sony Cyber-shot RX1R III Einführungsanleitung Seite 3

This camera is compatible with SD memory cards.
When you use a memory card with this camera for the first
time, format the card using the camera in order to stabilize
the performance of the memory card.
Charging the battery pack
Charge lamp
To an external power
source
Use a USB-PD-compatible device with an output of 18 W
(9 V/2 A) or more and a USB Type-C cable (USB-C – USB-C)
that supports 3 A or more.
Performing initial setup for the camera
By establishing a Bluetooth connection (pairing) between the
camera and a smartphone, you can perform initial camera
setup such as date and time settings from the smartphone.
Install the smartphone application on your smartphone in
advance, and then follow steps  to  under "Procedures for
initial camera setup."
 Turn the power off.
• If the camera is turned on, the
battery pack will not be charged.
 Connect the USB Type-C® terminal
of the camera to the USB Type-C
terminal of a device compatible with
USB PD (USB Power Delivery) using
a commercially available USB Type-C
cable (USB-C® – USB-C).
• The charge lamp will light up
when charging starts. When the
charge lamp turns off, charging is
completed.
EN
EN
3