Renson Healthbox II TouchDisplay Bedienungsanleitung Seite 69

10 • Problem solving
10.1 • Rebooting after power failure
Initiating the TouchDisplay (e.g. after a power failure):
➊
➋
• The following screen appears, showing the day and clock.
• The configuration needs to be repeated. Follow the steps under
Step 2, as described in section 7.3.2
• The FAN NOT READY screen appears for about 1 minute
when the time is set. The main control menu appears once the
connection is established again (this is done automatically).
EN
69