Linking The Touchdisplay With The Ventilator Unit - Renson Healthbox II TouchDisplay Bedienungsanleitung

6 • Linking the TouchDisplay with the ventilator unit
Before the TouchDisplay can be used it needs to be individually linked
to the ventilator unit. The control is ready for use once the link is
established.
A screen with day and clock settings appears once the TouchDisplay is
connected to the mains. (see step 2 in section 7.3.2)
The screen "select country" appears. Choose the country for which the
factory settings will be loaded by using the ▼ , ▲ keys and confirm
with n (for other countries, choose Belgium).
The screen "Fan connection" appears and "Update Link" lights up.
Now it is time to make the connection with the ventilator unit.
The linking needs to happen from up close. We advise to link the
TouchDisplay and the ventilator unit in the same room at a distance of
more than 3m.
EN
46