Application With 2 Or More Touchdisplays - Renson Healthbox II TouchDisplay Bedienungsanleitung

8 • Application with 2 or more TouchDisplays
The ventilator unit can be controlled with multiple TouchDisplay controls. The main control is put
in the kitchen or living room, depending on the lay­out (see section 5. "installation and connec­
tion"). Other control(s) ­ called secondary control(s) ­ can be placed anywhere.
You first have to program some additional settings when you decide to operate the ventilator
unit with multiple TouchDisplay controls;
­ The secondary control(s) need to be linked to the ventilator unit first.
­ The secondary control(s) needs to be programmed as a secondary control or if necessary,
as a repeater.
­ The CO threshold of the secondary control(s) needs to be disactivated.
2
Implement the steps in the correct order as described further on in this section.
Use the INSTALLER MENU of the TouchDisplay for this. Access the INSTALLER MENU as follows:
• Access the USER MENU from the main control menu by briefly
pressing both ▲ and
MENU by pressing both
• You can choose between different installer menu's by pressing
▲ or ▼ .
• Press n to select a certain configuration menu.
• You can exit the INSTALLER MENU by shortly pressing
both ▲ and ▼ .
▼ . You can now access the INSTALLER
▲ and ▼ for three seconds.
EN
63