RENPHO RP-FM079R Benutzerhandbuch Seite 8

No heating or
insufficient
heating.
The touch panel
is not working
properly.
1. The heat function is
turned off.
2. The working heat area
might be the bottom, not
full/Instep.
3. The product structure
and working principle limits
how fast the bottom can
heat up. Therefore, the
heating-up may seem a bit
slow, 7-10 minutes before
you can feel the obvious
heat.
1. The plastic film on the
touch panel is not removed.
2. Fingers are wet.
3. Insufficient touch area.
07
1. Press the "HEAT"
button. The Purple
indicator light should
turn on.
2. Choose the
Full/Instep Heat area
to get more sufficie-
nt heating.
3. It takes about 7-10
minutes to fully heat
up. Please be patient
as this is to avoid the
temperature rising
too fast.
1. Remove the
plastic film before
use.
2. Dry your fingers
before touching the
button.
3. Use your thumb
to press buttons to
get better touch
sensitivity.