RENPHO RP-FM079R Benutzerhandbuch Seite 7

10. Please keep the product clean. You can use a soft cotton cloth
and neutral detergent to clean it. Dry completely before use.
11. To provide temperature protection and user safety, this device will
automatically shut OFF when the temperature exceeds a safe limit.
The product
does not work.
The massage
intensity is too
high or too low.
1. Poor contact due to
disconnected power supply
or loose plug.
2. The power switch is off or
the timer has been reset.
3. The motor automatically
shuts off due to the device
being on too long activating
overheating protection.
1. Your foot is positioned at
the wrong angle.
2. Didn't choose the
intensity level which is
proper for you.
06
1. Re-plug to the
power source.
2. Turn the power
switch on again.
3. Use the massager
after the motor
cools down
naturally.
1. Adjust the contact
angle to get
moderate intensity.
2. The massager
has 3 intensity
levels, choose the
intensity you prefer.
It is recommended
to begin with the
lowest settings.