i-tec C31DUALDOCKPD Gebrauchsanweisung Seite 5

Quick Start
USB Power Delivery (USB PD) – USB-C connector optional feature. The connector
with this support can both charge and be recharged and supports loads up to 60W
(according to the profiles 4). For Windows 10 USB Power Delivery can not be applied
to the earlier USB 3.0/2.0 A, B and micro B ports.
DOCKING STATION DESCRIPTION/SPECIFICATION
Front panel:
1. 1x USB-A 3.0 port (data transfer rate up to 5 Gbps ) with fast charging according to
spec. BC 1.2 – for connecting and rapid charging of USB devices
2. 1x USB-C 3.1 (Gen. 1) port – for connecting of USB-C devices and data transfer
3. 1x Audio 3.5 mm Jack – for headphones 2.1
4. ON / OFF switch – for the docking station switching on/off
Rear panel:
5. Power supply input (DC 20V/5A, max. 100W) – power from an external power
adapter
6. 1x USB-C (support for data, Display Port Alt mode, Power Delivery Alt mode) - for
connecting of the docking station to notebooks, tablets, PCs or smartphones with
the USB-C port; Power Delivery with profile 4 (max. 60 W)
7. 1x Display port (DP) – for connecting of the monitor with a DP input
8. 1x HDMI port – for connecting of the monitor with a HDMI input
Note to the graphical interface:
One monitor: 1x HDMI max. resolution 3840x2160 / 30Hz or 1x Display Port max.
resolution 3840x2160 / 30Hz. Two monitors (MST): supports up to 1920x1200 /
60Hz. Modes: Extend, Mirror and Primary monitor. 16 / 32 bit colour support.
9. 1x Ethernet GLAN RJ-45 port – for connecting to an Ethernet network / router /
switch / hub and the Internet
10. 2x USB-A 3.0 port (data transfer rate up to 5 Gbps ) – for connecting of USB
devices
EN
04