Herunterladen Inhalt Inhalt Diese Seite drucken

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 20
USB-C Quattro Display
Docking Station
with Power Delivery 85 W
User guide • Gebrauchsanweisung • Mode d'emploi
Manual de instrucciones • Manuale • Uživatelská příručka
Instrukcje obsługi • Užívateľská príručka • Vartotojo vadovas
Handleiding
P/N: C31QUATTRODOCKPD

Werbung

Inhaltsverzeichnis
loading

Inhaltszusammenfassung für i-tec USB-C Quattro

  • Seite 1 USB-C Quattro Display Docking Station with Power Delivery 85 W User guide • Gebrauchsanweisung • Mode d’emploi Manual de instrucciones • Manuale • Uživatelská příručka Instrukcje obsługi • Užívateľská príručka • Vartotojo vadovas Handleiding P/N: C31QUATTRODOCKPD...
  • Seite 2 Please read the entire instruction manual carefully. Detailed manual is available on our website www.i-tec.cz/en/ in the tab „Manuals, drivers“. In case of any issues, please contact our technical support at: support@itecproduct.com Bitte lesen Sie das gesamte Handbuch sorgfältig durch. Die ausführliche Gebrauchsanweisung ist auch auf unserer Webseite www.i-tec.cz/de/...
  • Seite 3 Prosíme o pečlivé přečtení celého manuálu. Podrobný manuál je k dispozici na našem webu www.i-tec.cz v zá ložce „Manuály, ovladače“ u tohoto produktu. V pří padě problémů se můžete obrátit na naši technickou podporu: support@itecproduct.com Upewnij się, że uważnie przeczytałeś instrukcji obsługi. Szczegółowy podręcznik jest dostępny na naszej stronie internetowej www.i-tec.cz/pl/ w zakładce...
  • Seite 4: Inhaltsverzeichnis

    USB-C Quattro Display Docking Station with Power Delivery 85 W ENGLISH........... 05–19 DEUTSCH..........20–34 FRANÇAIS..........35–49 ESPAÑOL........... 50–64 ITALIANO........... 65–80 ČESKY............81–95 POLSKI............96–111 SLOVENSKY..........112–126 LIETUVOS..........127–141 NEDERLANDS........... 142–157 WEEE............158–159 Declaration of Conformity......160–161 FCC..............162...
  • Seite 5 Manual GLOSSARY • Interface / port / connector / input / slot – a place where two devices are physically connected. • Chipset – a semiconductor device in a laptop, tablet or PC controlling the function of a port. • USB-C / USB Type-C –...
  • Seite 6: Usb-C Quattro Display

    USB-C Quattro Display Docking Station with Power Delivery 85 W DP 1.4 HBR3 DSC: 1 monitor – up to 5K/60 Hz 2 monitors – up to 2x 4K/60 Hz (Four monitor combination): Up to 2x 2048x1152/60 Hz and 2x 1440p/60 Hz •...
  • Seite 7 Manual Front panel: ON/OFF switch for the docking station 3.5 mm Microphone jack 3.5mm Audio jack USB­C gen. 1 port (for data only) USB 3.0 port (5 GB/s) with Fast Charge support (BC 1.2) Rear panel: Power supply input – external power adapter (output: DC 20.0V/6.75A) USB-C port for connection of the docking station to a laptop with a USB-C or USB­A interface (the supply contains an adapter of USB­C/F to USB­A/M for connection to a USB­A port).
  • Seite 8: System Requirements

    USB-C Quattro Display Docking Station with Power Delivery 85 W SYSTEM REQUIREMENTS Hardware requirements: Device with a free USB-C or Thunderbolt™3 port Requirements for Power Delivery feature: Device with a free USB-C or Thunderbolt™3 port with “Power Delivery” support Requirements for video output: Device with a free USB-C port with “DisplayPort Alternate Mode”...
  • Seite 9: Driver Installation In Macos

    In this case, disconnect the docking station, uninstall the existing drivers (see chapter “Uninstalling Drivers”), and reinstall the latest drivers available on our website www.i-tec.cz/en on the “Download” tab of this product. Then reconnect the docking station to the laptop / tablet. In case of problems, please contact our technical support: support@itecproduct.com.
  • Seite 10: Installing Drivers In Other Operating Systems

    USB-C Quattro Display Docking Station with Power Delivery 85 W HARDWARE INSTALLATION (CONNECTING THE DOCKING STATION TO MACBOOK) Turn on the MacBook and connect the power adapter to the docking station. Connect the docking station power adapter to the AC 110 V / 230 V network and press the ON button.
  • Seite 11 Manual Options for controlling the monitor with attached docking station Ad a) DisplayLink Manager – the software version is displayed after selecting. Installed software version Ad b) Audio settings – this will allow audio settings (settings similar to Control Panels → Audio). For use, select 2­channel headphones and a 3.5mm jack microphone.
  • Seite 12 USB-C Quattro Display Docking Station with Power Delivery 85 W This can be used to set up Skype, for example. Audio settings for Skype Ad c) Advanced configuration – clicks to display the Windows Display Resolution settings. Display Resolution in Windows 10 Now you can set Extend and Mirror mode: •...
  • Seite 13 Manual By selecting the “Set this monitor as primary” field, you select the additional monitor as the primary monitor. By clicking on the second monitor and moving it you can position this monitor as required relative to the original monitor of your laptop / tablet.
  • Seite 14 USB-C Quattro Display Docking Station with Power Delivery 85 W Control the monitor in Windows 7 Control the monitor in Windows 8 / 8.1 and Windows 10 UNINSTALLING DRIVERS Go to Control Panel → All Control Panel Items → Programs and Features → Remove: DisplayLink Core Software for Video drivers.
  • Seite 15: Using In Macos

    Manual Uninstalling drivers USING IN MACOS After connecting the monitor, the screen on your Mac will glimmer, which is a standard condition, after stabilization it is possible to perform standard setting of the monitor here: System Preferences-Displays:...
  • Seite 16 USB-C Quattro Display Docking Station with Power Delivery 85 W Click on Arrangement and in the default mode (Extended desktop) click on the new monitor and drag it as necessary vis-à-vis the Mac monitor. If you select Mirror displays the mode will change to Mirror (the resolution of the monitors will be automatically adjusted according to their parameters and the highest possible resolution will be set on both monitors).
  • Seite 17 Manual Mirror mode: This mode can only be used if supported by the Mac. Click on Gather Windows: using this option you can choose the settings of the corresponding monitor – Scaled (offers available resolutions), Rotation (Standard, 90°, 180° and 270°) and Refresh rate (if offered). Below the following setting options are displayed.
  • Seite 18: Other Functions

    USB-C Quattro Display Docking Station with Power Delivery 85 W Display option 2 In Scaled mode click on the required icon, the resolution is displayed below (which looks like this, 3008x1692 = 4K@30Hz) Closed-display mode – It is possible to work on the connected monitor when the Mac monitor is closed, but you will require power supply and mouse and keyboard connection.
  • Seite 19: Safety Instructions

    Check functionality after falling to water or to the ground. • Check functionality when the cover is broken. • Send the device back if it does not work in accordance with the user manual. FREQUENTLY ASKED QUESTIONS Available on our website www.i-tec.cz/en/ on the “FAQ” tab of this product.
  • Seite 20: Spezifikation

    USB-C Quattro Display Docking Station with Power Delivery 85 W BEGRIFFSWÖRTERBUCH • Schnittstelle / Port / Anschluss / Eingang / Steckplatz – Stelle, an der zwei Geräte physisch verbunden werden. • Kontroller – Halbleiterbestandteil (s.g. Chipsatz) in Notebook, Tablet­PC, der die Arbeit eines der Ports sichert.
  • Seite 21 Manual DP 1.4 HBR3: 1 Bildschirm – bis zu 4 K/60 Hz 2 Bildschirme – bis zu 2x 1440 p/60 Hz DP 1.4 HBR3 DSC: 1 Bildschirm – bis zu 5K/60 Hz 2 Bildschirm – bis zu 2x 4K/60 Hz (Kombination von 4 Bildschirmen): Bis zu 2x 2048x1152/60 Hz und 2x 1440p/60 Hz •...
  • Seite 22: Beschreibung

    USB-C Quattro Display Docking Station with Power Delivery 85 W BESCHREIBUNG Frontseite: EIN/AUS-Schalter zum Ein- und Ausschalten der Dockingstation 3.5mm Mikrofoneingang 3.5mm Audioausgang USB­C Port Gen. 1 (nur für Daten) USB 3.0 Port (5GB/s) mit Unterstützung für schnelles Aufladen (BC 1.2) Rückseite:...
  • Seite 23: Systemanforderungen

    System die neuesten Treiber für Ihr Gerät installiert haben und BIOS aktualisiert ist. Für Windows sind die Treiber unter unserer Internetseite www.i-tec.cz/setup unter „Download“ bei diesem Produkt herunterzuladen. Starten Sie die Installation von heruntergeladener Datei, wählen Sie die Installationssprache aus und gehen Sie nach Anweisungen auf dem Bildschirm vor.
  • Seite 24: Hardware Installation (Anschluss Der Docking Station An Notebook / Tablet Pc)

    USB-C Quattro Display Docking Station with Power Delivery 85 W 8, 8.1 geht, ist eine einmalige kollektive Installation durch Systemadministrator möglich. Für mehrere Informationen über diese Installationsmöglichkeit lesen Sie die Anweisung hier: http://www.displaylink.com/downloads/corporate HARDWARE INSTALLATION (ANSCHLUSS DER DOCKING STATION AN NOTEBOOK / TABLET PC) Schalten Sie das Notebook / Tablet PC ein und schließen Sie den Versorgun-...
  • Seite 25: Hardwareinstallation

    Starten Sie Ihr MacBook nach der Installation neu. TREIBERINSTALLATION UNTER WEITEREN BETRIEBSSYSTEMEN Für Android, Chrome OS und Ubuntu benutzen Sie die Treiber vom Hersteller des DisplayLink Chipsatzes. Sie sind unter unserer Internetseite www.i-tec.cz/setup unter „Download“ bei diesem Produkt oder hier zu finden: http://www.displaylink.com/downloads.
  • Seite 26 USB-C Quattro Display Docking Station with Power Delivery 85 W Hier können Sie dann wählen: a) DisplayLink Manager b) Toneinstellungen c) Fortgeschrittene Konfiguration Wahlen zur Bildschirmbedienung mit angeschlossener Docking Station Ad a) DisplayLink Manager – nach der Wahl wird die installierte Softwareversion angezeigt.
  • Seite 27: Es Ist Möglich Erweitern (Extend) Und Spiegeln / Duplizieren (Mirror) Einzustellen)

    Manual Es kann dann für die Einstellung von z. B. Skype ausgenutzt werden. Toneinstellung für Skype Ad c) Fortgeschrittene Konfiguration – nach dem Klicken wird die Einstellung für Anzeigeauflösung unter Windows System angezeigt. Anzeigeauflösung unter Windows 10 Es ist möglich Erweitern (Extend) und Spiegeln / Duplizieren (Mirror) einzustellen): •...
  • Seite 28 USB-C Quattro Display Docking Station with Power Delivery 85 W Durch die Wahl des Feldes „Diesen Bildschirm zum Primärbildschirm einstellen“ wird der zusätzliche Bildschirm zum Hauptbildschirm eingestellt. Nach dem Klick auf den zweiten Bildschirm und nach seinem Verschieben können Sie ihn nach Bedarf gegenüber dem primären Bildschirm von Ihrem Notebook / Tablet-PC platzieren.
  • Seite 29: Treiberdeinstallation

    Manual Mit Hilfe der Tastenkombination „Windows“ + P ist es auch möglich, beide Displays einfach zu bedienen (diese Tastaturabkürzung funktioniert erst ab Windows 7 und höher). Zur Bildschirmbenutzung unter Windows 7 dienen folgende Vorwahlen: Nur Computer, Duplizieren, Erweitern und Nur Projektor. Unter Windows 8 / 8.1 kann gewählt werden: Nur PC-Bildschirm, Duplizieren, Erweitern, Nur zweiter Bildschirm.
  • Seite 30: Verwendung Unter Macos

    USB-C Quattro Display Docking Station with Power Delivery 85 W Core Software für Videotreiber. Während der Deinstallation bestätigen Sie die angebotenen Wahlen. Treiberdeinstallation VERWENDUNG UNTER MACOS Nach dem Anschluss von Bildschirm wird das Display auf Ihrem Mac blinken, was ein Standardzustand ist, und nach der Stabilisierung kann die Standardeinstellung...
  • Seite 31 Manual Klicken Sie auf Anordnen und im erweiterten Modus klicken Sie auf den neuen Bildschirm und ziehen ihn nach Bedarf hin zum Mac Bildschirm. Durch die Wahl „Bildschirme spiegeln“ wird der Modus auf „Spiegeln“ (die Auflösung der Bildschirme wird automatisch nach ihren Parametern geändert und auf die möglichst höchste Auflösung auf beiden Bildschirmen eingestellt) eingestellt.
  • Seite 32 USB-C Quattro Display Docking Station with Power Delivery 85 W Modus „Spiegeln“: Kann verwendet werden, wenn er von Mac angeboten wird. Klicken Sie auf „Fenster sammeln“: durch diese Wahl können Sie die Einstellung des entsprechenden Bildschirms wählen – Auflösung (zeigt verwendbare Auflösungen an), Drehung (Standard, 90°, 180°...
  • Seite 33: Andere Funktionen

    Manual Abbildung 2 Im angepassten Modus klicken Sie auf die von Ihnen gewählte Schaltfläche, unter dem Bildschirm erscheint die Auflösung (hier zum Beispiel 3008x1692 = 4K@30Hz) Modus des zugeklappten Bildschirms – Die Arbeit auf angeschlossenem Bildschirm, wenn der Mac Bildschirm zugeklappt ist, ist nur bei Netzversorgung und angeschlossener Maus und Tastatur möglich.
  • Seite 34: Sicherheitshinweise

    USB-C Quattro Display Docking Station with Power Delivery 85 W Audio Toneinstellungen, für Hören über Grafikausgang, ist einzustellen / zu überprüfen unter: Systemeinstellungen-Ton-Ausgang – wählen Sie USB Audio Device. Toneinstellungen für Kopfhörer und Bildschirm können unter Öffnen- Applikationen-Utilities-Einstellung von Audio MIDI.app gewählt werden –...
  • Seite 35: Paramètres Techniques

    Manual GLOSSAIRE DES TERMES TECHNIQUES • Interface / port / connecteur / entrée / emplacement - endroit où deux périphériques sont physiquement connectés. • Contrôleur ­ composant semi­conducteur (chipset) se trouvant dans un ordinateur portable / tablette, permettant le fonctionnement de l'un des ports. •...
  • Seite 36 USB-C Quattro Display Docking Station with Power Delivery 85 W DP 1.4 HBR3: 1 moniteur – jusqu’à 4 K/60 Hz 2 moniteurs – jusqu’à 2x 1440 p/60 Hz DP 1.4 HBR3 DSC: 1 moniteur – jusqu’à 5 K/60 Hz 2 moniteurs – jusqu’à 2x 4 K/60 Hz (Combinaison de quatre moniteurs) : Jusqu’à...
  • Seite 37 Manual SPÉCIFICATIONS ET DESCRIPTION Panneau avant : Interrupteur ON/OFF pour allumer et éteindre la station d’accueil 3.5 mm Entrée microphone 3.5mm Sortie audio port USB­C gen. 1 (uniquement pour les données) USB 3.0 port (5GB/s) with Fast Charge support (BC 1.2) Panel arrière : Entrée pour l’alimentation (20 V/6.75 A) port USB-C - pour une connexion de la station d’accueil avec un port USB-C...
  • Seite 38: Exigences Système

    USB-C Quattro Display Docking Station with Power Delivery 85 W EXIGENCES SYSTÈME Hardware nécessaire : Équipement disposant d’un port USB-C ou Thunderbolt™3 libre Nécessaire pour la fonction de fourniture de puissance (Power Delivery): Équipement disposant d’un port USB-C ou Thunderbolt™3 libre et compatible avec la fonction “Fourniture de puissance”...
  • Seite 39 (voir chapitre «Désinstallation des pilotes»), et réinstallez les derniers pilotes disponibles sur notre site internet www.i-tec.cz/fr sous l’onglet «Download» du produit. Puis reconnectez la station d’accueil à l’ordinateur portable / tablette. Si vous avez des problèmes, veuillez contacter notre équipe de support à...
  • Seite 40 USB-C Quattro Display Docking Station with Power Delivery 85 W INSTALLATION MATERIELLE (RACCORDEMENT DE LA STATION D’EMBALLAGE MACBOOK) Mettez le MacBook sous tension et connectez l’adaptateur secteur à la station d’accueil. Connectez l’adaptateur d’alimentation de la station d’accueil au réseau AC 110 V / 230 V AC et appuyez sur le bouton ON.
  • Seite 41 Manual Ici vous pouvez choisir: a) Gestionnaire DisplayLink b) Paramètres sonores c) Configuration avancée Options de contrôle du moniteur avec station d’accueil connectée Ad a) DisplayLink Manager ­ la version du logiciel est affichée après la sélection Version du logiciel installée Ad b) Paramètres audio - Permet de régler le son (les paramètres sont similaires à...
  • Seite 42 USB-C Quattro Display Docking Station with Power Delivery 85 W Cela peut être utilisé pour configurer Skype, par exemple. Paramètres audio pour Skype Ad c) Configuration avancée – après avoir cliqué s’affiche les paramètres de résolution d’affichage Windows. Résolution d’affichage dans Windows 10 Vous pouvez maintenant exécuter les paramètres Etendre (Extend) et Miroir...
  • Seite 43 Manual En sélectionnant «Définir ce moniteur comme moniteur principal», vous choisissez le moniteur principal comme moniteur primaire. Lorsque vous cliquez sur le second moniteur et le faites glisser, placez-le au besoin sur le moniteur d’origine de votre ordinateur portable / tablette. Placez un moniteur supplémentaire sur le moniteur d’ordinateur portable / tablette d’origine Mode veille / Mise en veille prolongée et port vidéo - après avoir activé...
  • Seite 44 USB-C Quattro Display Docking Station with Power Delivery 85 W Contrôle du moniteur sous Windows 7 Contrôle du moniteur sous Windows 8 / 8.1 et Windows 10 PILOTES DE DÉSINSTALLATION Par défaut, allez dans Panneau de configuration → Tous les éléments du panneau de configuration →...
  • Seite 45 Manual Désinstallation des pilotes UTILISATION DE LA STATION D’ACCUEIL AVEC MACOS Une fois le moniteur connecté, l’écran de votre Mac clignote, ce qui correspond à un état normal. Après la configuration, vous pouvez définir les paramètres ici: Préférences Système-Moniteurs:...
  • Seite 46 USB-C Quattro Display Docking Station with Power Delivery 85 W Sous l’onglet Disposition et en mode par défaut (Étendre), cliquez sur le nouveau moniteur et faites-le glisser sur le moniteur Mac si nécessaire. Lorsque Moniteurs miroirs est sélectionné, le mode passe à Miroir (la résolution du moniteur est réglée automatiquement en fonction des paramètres réglés et la résolution...
  • Seite 47 Manual Mode miroir: Peut être utilisé uniquement avec Mac En sélectionnant Rassembler les fenêtres, vous pouvez choisir les paramètres du moniteur approprié - Résolution personnalisée (offre les résolutions utilisables), Rotation (Standard, 90 °, 180 ° et 270 °) et Taux de rafraîchissement (si disponible). Selon le moniteur utilisé, les paramètres sont les suivants: Option d’affichage 1...
  • Seite 48: Autres Fonctions

    USB-C Quattro Display Docking Station with Power Delivery 85 W Option d’affichage 2 En mode personnalisé, cliquez sur l’icône choisie sous l’écran s’affiche la résolution (ici, visuellement 3008x1692 = 4K@30Hz) Mode d’affichage fermé - Le travail sur le moniteur externe connecté lorsque le moniteur Mac est en position capot fermé, n’est possible que lorsque le...
  • Seite 49 Vérifier la fonctionnalité lorsque le couvercle est cassé. • L'équipement ne fonctionne pas conformément au manuel. RÉPONSES AUX QUESTIONS FRÉQUEMMENT POSÉES À votre disposition sur notre page web www.i-tec.cz/fr, où se trouvent sous l’onglet de « FAQ » qui correspondent au respectif produit.
  • Seite 50: Glosario De Términos

    USB-C Quattro Display Docking Station with Power Delivery 85 W GLOSARIO DE TÉRMINOS • Interfaz / puerto / conector / entrada / ranura – Un lugar donde dos dispositivos están físicamente interconectados. • Unidad de control (UC) – Un componente semiconductor (llamado chipset) en una PC/ tableta, que proporciona la operación de uno de los puertos.
  • Seite 51 Manual USB-C DP Alt mode ports 2x DP DP 1.2 HBR2: 1 monitor – hasta 4K/30Hz 2 monitores – hasta 2x 1080p/60Hz DP 1.4 HBR3: 1 monitor – hasta 4K/60Hz 2 monitores – hasta 2x 1440p/60Hz DP 1.4 HBR3 DSC: 1 monitor –...
  • Seite 52 USB-C Quattro Display Docking Station with Power Delivery 85 W DESCRIPCIÓN Panel delantero: Conmutador ON/OFF para la conexión y desconexión de la estación de acoplamiento 3.5mm Entrada de micrófono 3.5mm Salida de audio puerto USB­C gen. 1 (sólo para datos) USB 3.0 port (5GB/s) with Fast Charge support (BC 1.2)
  • Seite 53: Requisitos Del Sistema

    Para Windows, descargue los controladores de nuestro sitio web www.i-tec.cz/setup en la pestaña “Download” de este producto. Ejecute la instalación desde el archivo descargado, seleccione el idioma de instalación y siga las instrucciones de la pantalla.
  • Seite 54 USB-C Quattro Display Docking Station with Power Delivery 85 W En múltiples entornos portátiles equipados con Windows 7, 8, 8.1, es posible que el administrador del sistema realice una instalación corporativa por única vez. Para obtener más información acerca de cómo instalar, lea las instrucciones aquí: http://www.displaylink.com/downloads/corporate...
  • Seite 55 Reinicie MacBook después de que la instalación esté completa. INSTALACIÓN DE CONTROLADORES EN OTROS SISTEMAS OPERATIVOS Para Android, Chrome OS y Ubuntu, utilice el controlador de chipset DisplayLink. Estos están disponibles para descargar en nuestro sitio web www.i-tec.cz/setup bajo la pestaña “Download” para este producto o aquí: http://www.displaylink.com/downloads.
  • Seite 56 USB-C Quattro Display Docking Station with Power Delivery 85 W USO DE LA ESTACIÓN DE DOSIFICACIÓN DE WINDOWS En los iconos ocultos de la barra de inicio, haga clic en el icono de red - - DisplayLink: Aquí puede elegir:...
  • Seite 57 Manual Ajustes de sonido Esto se puede utilizar para configurar Skype, por ejemplo. Ajustes de sonido para Skype Ad c) Configuración avanzada: tras el clic apare la configuración para la Resolución de la visualización del sistema Windows. Resolución de la pantalla en Windows 10...
  • Seite 58 USB-C Quattro Display Docking Station with Power Delivery 85 W Ahora puede realizar los ajustes Extender y Espejo: • Modo Extender: En la pantalla, seleccione varias pantallas → Ampliar esta vista → Aceptar. • Modo Espejo: En la pantalla, seleccione varias pantallas → Duplicar esta visualización en dos monitores seleccionados por usted...
  • Seite 59 Manual Modo espejo - El monitor adicional es controlado por los parámetros del monitor original en el sistema, Si configura el modo Espejo y su monitor original tiene una resolución de 1280x1024, la pantalla se transfiere a un monitor adicional con una resolución de hasta 1280x1024, incluso si la ajusta a una resolución más alta.
  • Seite 60 USB-C Quattro Display Docking Station with Power Delivery 85 W DESINSTALACIÓN DE LOS CONTROLADORES Normalmente vaya a Panel de Control → Programas → Programas y características → Desinstalar: DisplayLink Core Software para controladores de vídeo. Durante la desinstalación, confirme sus opciones.
  • Seite 61 Manual En la pestaña Alineación y en Modo predeterminado (Extender), haga clic en el nuevo monitor y arrástrelo según sea necesario desde la pantalla Mac. Cuando se selecciona Pantallas duplicadas, el modo se cambia a Espejo (la resolución de la pantalla se ajusta automáticamente según sus parámetros y se establece la resolución más alta posible en ambas pantallas).
  • Seite 62 USB-C Quattro Display Docking Station with Power Delivery 85 W Modo Pantallas Duplicadas: Sólo se puede utilizar cuando se ofrece con MacBook. Seleccionando Reunir Ventanas, puede elegir la configuración de la pantalla ­ Resolución personalizada (ofrece resoluciones utilizables), Rotar (Estándar, 90 °, 180 °...
  • Seite 63: Otras Funciones

    Manual Opción de visualización 2 En el modo Personalizado, haga clic en el icono elegido debajo de la pantalla para describir la resolución (Aquí 3008x1692 = 4K@30Hz) Modo de visualización cerrado - El trabajo en el monitor externo conectado cuando el monitor Mac está inclinado, sólo es posible cuando el Mac está alimentado y el ratón y el teclado están conectados.
  • Seite 64: Preguntas Frecuentes

    Verificar la funcionalidad después de caer en el agua o en el suelo. • Verificar la funcionalidad cuando la cubierta está rota. • Reivindique que el equipo no funcione de acuerdo con el manual. PREGUNTAS FRECUENTES Disponible en nuestra página web www.i-tec.cz/es, en la pestaña “FAQ” de este producto.
  • Seite 65: Termini Tecnici

    Manual TERMINI TECNICI • Interfaccia / porta / connettore / ingresso / slot – punto di collegamento materiale di due dispositivi. • Unità di controllo – componente semiconduttore di notebook/tablet (cd. chipset) che provvede al funzionamento di porte. • USB-C / USB Type-C – nuovo connettore standard e simmetrico che l’organizzazione USB­IF ha introdotto nella sua specifica USB 3.1.
  • Seite 66 USB-C Quattro Display Docking Station with Power Delivery 85 W USB-C DP Alt mode ports 2x DP DP 1.2 HBR2: 1 monitor – fino a 4K/30Hz 2 monitor – fino a 2 volte 1080p/60Hz DP 1.4 HBR3: 1 schermo – fino a 4K/60Hz 2 schermi –...
  • Seite 67 Manual Pannello posteriore: Ingresso per l’alimentazione (20V/6.75A) Porta USB-C - per collegare la docking station a una porta USB-C o Thunderbolt™ 3 del portatile. Questa porta è in grado di alimentare dispositivi fino a 85W. 2x DisplayPort 2x HDMI 10. Porta Ethernet GLAN RJ-45 - con supporto 10/100/1000 Mb/s 11.
  • Seite 68: Requisiti Di Sistema

    USB-C Quattro Display Docking Station with Power Delivery 85 W REQUISITI DI SISTEMA Requisiti hardware: Dispositivo con porta libera USB-C o Thunderbolt™3 Requisiti per la funzione Power Delivery: Dispositivo con porta libera USB-C o Thunderbolt™3 con supporto “Power Delivery” Requisiti per l’uscita video: Dispositivo con porta libera USB-C con supporto “DisplayPort Alternate Mode”...
  • Seite 69 (si veda il capitolo “Disinstallare gli strumenti”) e installare di nuovo gli strumenti più recenti che possono essere scaricati dalla scheda “Download” sul nostro sito web: www.i-tec.cz/it Dopodiché ricollegare la Stazione dock al notebook/tablet. In caso di problemi persistenti non esitare a contattare il nostro centro di assistenza tecnica: support@itecproduct.com.
  • Seite 70 USB-C Quattro Display Docking Station with Power Delivery 85 W INSTALLAZIONE DELL’HARDWARE (COLLEGAMENTO DELLA STAZIONE DOCK AL MACBOOK) Accendere il MacBook e collegare l’adattatore di alimentazione alla Stazione dock. Collegare l’adattatore di alimentazione della Stazione dock alla rete elettrica AC 110 V / 230 V e premere l’interruttore ON.
  • Seite 71 Manual USO DELLA STAZIONE DOCK NEL SISTEMA OPERATIVO WINDOWS Cliccare sull’icona Collegamento di rete ubicata tra le icone nascoste della barra delle applicazioni: A questo punto potete scegliere: a) DisplayLink Manager b) Impostazione audio c) Configurazione avanzata Funzioni optional per comandare il monitor con la Stazione dock connessa a) DisplayLink Manager –...
  • Seite 72 USB-C Quattro Display Docking Station with Power Delivery 85 W b) Impostazione audio – permette di impostare l’audio (l’impostazione è simile all’impostazione dell’audio tramite il Pannello di controllo → Audio). Scegliere la cuffia a 2 canali e il microfono con il connettore jack di 3.5 mm. Impostare l’ingresso e l’uscita del “DisplayLink Audio”...
  • Seite 73 Manual Risoluzione dell’immagine nel SO Windows 10 A questo punto si può procedere all’impostazione della modalità: Immagine estesa / Immagine speculare / Immagine duplicata: • Modalità Immagine estesa: selezionare la variante Più monitor → Estendere l’immagine → OK. • Modalità Immagine speculare / Immagine duplicata: selezionare la variante Più...
  • Seite 74 USB-C Quattro Display Docking Station with Power Delivery 85 W Posizionamento del monitor secondario rispetto al monitor primario del notebook/tablet Modalità Standby / Hibernate e Video port – dopo l’attivazione del notebook/ tablet nella modalità Standby/Hibernate viene visualizzato il monitor primario (originario) perciò...
  • Seite 75 Manual Impostazione del monitor nel sistema Windows 7 Impostazione del monitor nei SO Windows 8/8.1 e Windows 10 DISINSTALLAZIONE DEGLI STRUMENTI Procedere in modo standard tramite il Pannello di controllo → Mostra tutto → Programmi e funzionalità → Disinstallare: DisplayLink Core Software per gli strumenti video.
  • Seite 76 USB-C Quattro Display Docking Station with Power Delivery 85 W Disinstallazione degli strumenti USO DELLA STAZIONE DOCK NEL SISTEMA OPERATIVO MACOS Collegato il monitor, lo schermo lampeggia ma è un fenomeno normale. Quando il lampeggio finisce, l’impostazione può essere effettuata qui: Preferenze di...
  • Seite 77 Manual Aprendo la scheda Disposizione nella modalità default (Estendere), cliccare sul nuovo monitor e trascinarlo rispetto al monitor Mac a seconda del bisogno. Se viene scelta la modalità Immagine speculare, la modalità cambia a quella Speculare e la risoluzione dei monitor si adegua automaticamente secondo i loro parametri impostando la risoluzione più...
  • Seite 78 USB-C Quattro Display Docking Station with Power Delivery 85 W Modalità Immagine speculare: Può essere usata solo se è a disposizione nel sistema Mac. Per impostare il rispettivo monitor scegliere la modalità Raggruppa le finestre – Risoluzione (visualizza le risoluzioni disponibili), Rotazione (Standard, 90°, 180°...
  • Seite 79: Altre Funzioni

    Manual Variante della visualizzazione n. 2 Cliccare sull’icona della Modalità selezionata. In basso appare la rispettiva risoluzione (in questo caso 3.008 x 1.692 = 4K, 30 Hz) Modalità display chiuso – questa funzione permette di usare il monitor esterno connesso quando lo scherma Mac è chiuso; il Mac deve essere alimentato e il mouse e la tastiera devono essere connessi.
  • Seite 80: Domande Frequenti

    USB-C Quattro Display Docking Station with Power Delivery 85 W navigatori o tablet. E’ sufficiente collegare il dispositivo da ricaricare alla porta USB della Stazione dock tramite il cavo originale. Audio Il dispositivo audio collegato tramite l’uscita grafica deve essere impostato e controllato qui: Selezioni di sistema-Audio-Uscita –...
  • Seite 81 Manual SLOVNÍK POJMŮ • Rozhraní / port / konektor / vstup / slot – místo, kde se fyzicky propojují dvě zařízení. • Řadič – polovodičová součástka (tzv. chipset) v notebooku / tabletu, zajišťující činnost některého z portů. • USB-C / USB Type-C – je nový symetrický konektor a standard, který uvedla USB­IF ve své...
  • Seite 82 USB-C Quattro Display Docking Station with Power Delivery 85 W DP 1.4 HBR3: 1 monitor – až 4K/60Hz 2 monitory – až 2x 1440p/60Hz DP 1.4 HBR3 DSC: 1 monitor – up to 5K/60Hz 2 monitors – up to 2x 4K/60Hz (Kombinace čtyř...
  • Seite 83: Systémové Požadavky

    Manual Přední panel: Přepínač ON/OFF pro zapnutí a vypnutí dokovací stanice 3.5mm Mikrofónní vstup 3.5mm Audio výstup USB­C port gen. 1 (pouze pro data) USB 3.0 port (5GB/s) with Fast Charge support (BC 1.2) Zadní panel: Vstup pro napájení (20V/6.75A) USB­C port ­...
  • Seite 84 USB-C Quattro Display Docking Station with Power Delivery 85 W Operační systém: • Windows 10, macOS , Android a Linux s nejnovějšími aktualizacemi Operační systém macOS nepodporuje technologii více­obrazového video přenosu Multi Stream Transport (MST), což znamená, že v případě připojení...
  • Seite 85 Ovladače je třeba nainstalovat pouze před prvním použitím. Doporučujeme mít nainstalován nejnovější operační systém macOS. Ovladače si stáhněte z našeho webu www.i-tec.cz/setup v záložce „Download“ u tohoto produktu a spusťte instalaci: Soubor rozbalte na plochu vašeho MacBooku jako virtuální disk, zvolte “Drivers“...
  • Seite 86 USB-C Quattro Display Docking Station with Power Delivery 85 W Poznámka pro macOS a monitory se dvěma DP kabely: Některé displeje s rozlišeními vyššími než 4K vyžadují k přenosu obrazu v plném rozlišení dva kabely Display Port: • 27palcový 5K monitor Dell UP2715K je podporován na iMacu (Retina 5K, 27palcový, konec roku 2014) nebo novějším a na Macu Pro (konec roku 2013)
  • Seite 87 Manual Ad b) Nastavení zvuku – umožní nastavení zvuku (nastavení je obdobné jako Ovládací panely → Zvuk). Pro použití zvolte 2­kanálová sluchátka a mikrofon s 3.5 mm jackem. Ve zvukových zařízeních si nastavte jako vstup a výstup „USB Audio“ jako výchozí zařízení. Nastavení...
  • Seite 88 USB-C Quattro Display Docking Station with Power Delivery 85 W Rozlišení zobrazení ve Windows 10 Nyní lze provádět nastavení Rozšířit (Extend) a Zrcadlit / Duplikovat (Mirror): • Režim Rozšířit (Extend): na obrazovce zvolte u Více monitorů → Rozšířit toto zobrazení → OK.
  • Seite 89 Manual Umístění jednoho přídavného monitoru vůči původnímu monitoru notebooku / tabletu Standby / Hibernate režim a Video port – po aktivaci notebooku / tabletu ze Standby / Hibernate režimu se zobrazuje primární (původní) monitor, proto doporučujeme používat jako primární ten, který je integrován s notebookem / tabletem, abyste se mohli opětovně...
  • Seite 90 USB-C Quattro Display Docking Station with Power Delivery 85 W Ovládaní monitoru ve Windows 7 Ovládaní monitoru ve Windows 8 / 8.1 a Windows 10 ODINSTALOVÁNÍ OVLADAČŮ Standardně postupujte přes Ovládací panely → Všechny položky Ovládacích panelů → Programy a funkce → Odebrat: DisplayLink Core Software pro Video...
  • Seite 91 Manual Odinstalování ovladačů POUŽITÍ DOKOVACÍ STANICE V MACOS Po připojení monitoru bude obrazovka na Vašem Macu problikávat, což je standardní stav. Po ustálení lze provádět nastavení zde: Předvolby systému- Monitory:...
  • Seite 92 USB-C Quattro Display Docking Station with Power Delivery 85 W V záložce Uspořádání a v defaultním režimu (Rozšířit), klikněte na nový monitor a přetáhněte jej dle potřeby vzhledem k monitoru Macu. Při volbě Zrcadlit monitory se změní režim na Zrcadlit (rozlišení monitorů se automaticky upraví podle jejich parametrů...
  • Seite 93 Manual Režim zrcadlit: Lze použít jen v případě, že je nabízen Macem. Volbou Shromáždit okna si můžete zvolit nastavení odpovídajícího monitoru – Přizpůsobené rozlišení (nabízí využitelná rozlišení), Otočení (Standardní, 90°, 180° a 270°) a Obnovovací frekvence (jestli je nabízena). Podle používaného monitoru jsou tyto možnosti nastavení: Varianta zobrazení...
  • Seite 94: Ostatní Funkce

    USB-C Quattro Display Docking Station with Power Delivery 85 W Varianta zobrazení 2 V Přizpůsobeném režimu klikněte na Vámi vybranou ikonku, pod obrazovkou se popíše dané rozlišení (zde vzhledově 3008x1692 = 4K@30Hz) Režim zavřeného displeje – práce na připojeném externím monitoru, když je monitor Macu sklopený, je možná...
  • Seite 95: Často Kladené Otázky

    V součinnosti se servisním oddělením: • Ověřte funkčnost po pádu do vody nebo na zem. • Ověřte funkčnost při prasknutí krytu. • Reklamujte zařízení nefungující dle manuálu. ČASTO KLADENÉ OTÁZKY K dispozici na našem webu www.i-tec.cz v záložce „FAQ“ u tohoto produktu.
  • Seite 96 USB-C Quattro Display Docking Station with Power Delivery 85 W TERMINOLOGIA • Interfejs / port / złącze / wejście / gniazdo - miejsce, gdzie fizycznie połączone są dwa urządzenia. • Chipset ­ urządzenie półprzewodnikowe w laptopie, tablecie lub komputerze sterującym funkcją portu.
  • Seite 97 Manual DP 1.4 HBR3: 1 monitor — do 4K/60 Hz 2 monitory — do 2x 1440p/60 Hz DP 1.4 HBR3 DSC: 1 monitor — do 5K/60 Hz 2 monitory — do 2x 4K/60 Hz (Kombinacja czterech monitorów): Do 2x 2048 x 1152/60 Hz i 2x 1440p/60 Hz •...
  • Seite 98 USB-C Quattro Display Docking Station with Power Delivery 85 W Panel przedni: Przełącznik ON/OFF do włączania i wyłączania stacji dokującej Wejście mikrofonowe 3.5 mm Wejście audio 3.5 mm Port USB­C gen. 1 (tylko dane) Port USB 3.0 (5 GB/s) z obsługą szybkiego ładowania (BC 1.2) Panel tylny: Wejście zasilania (20 V/6,75 A)
  • Seite 99: Wymagania Systemowe

    Przed instalacją sprawdź, czy w systemie zainstalowano najnowsze sterowniki dla urządzenia i zaktualizowanego systemu BIOS. Dla Windows pobierz sterowniki z naszej strony internetowej www.i-tec.cz/setup na karcie "Download" tego produktu. Uruchom instalację z pobranego pliku, wybierz język instalacji i postępuj zgodnie z instrukcjami.
  • Seite 100 USB-C Quattro Display Docking Station with Power Delivery 85 W INSTALACJA SPRZĘTU (PODŁĄCZENIE STACJI DOKUJĄCEJ DO LAPTOPA / TABLETU) Włącz laptop / tablet i podłącz zasilacz do stacji dokującej. Podłącz zasilacz stacji dokującej do sieci AC 110 V / 230 V i naciśnij przycisk WŁĄCZ.
  • Seite 101 INSTALOWANIE STEROWNIKÓW W INNYCH SYSTEMACH OPERACYJNYCH W przypadku Androida, Chrome OS i Ubuntu użyj sterowników chipsetu DisplayLink. Są one dostępne do pobrania na naszej stronie internetowej www.i-tec.cz/setup na karcie „Download” tego produktu lub tutaj: http://www.displaylink.com/downloads. PODŁĄCZANIE MONITORA HDMI / DISPLAY PORT Użyj kabla HDMI / DP, aby podłączyć...
  • Seite 102 USB-C Quattro Display Docking Station with Power Delivery 85 W Tutaj możesz wybrać: a) Menedżer DisplayLink b) Ustawienia dźwięku c) Konfiguracja zaawansowana Opcje do sterowania monitorem za pomocą dołączonej stacji dokującej Ad a) DisplayLink Manager - wersja oprogramowania jest wyświetlana po wybraniu.
  • Seite 103 Manual Ustawienia dźwięku Może to zostać użyte do skonfigurowania Skype’a. Ustawienia dzwięku Skype Ad c) Konfiguracja zaawansowana - kliknij, aby wyświetlić ustawienia rozdzielczości wyświetlania systemu Windows.
  • Seite 104 USB-C Quattro Display Docking Station with Power Delivery 85 W Rozdzielczość ekranu w systemie Windows 10 Teraz możesz ustawić tryb Extend and Mirror: • Tryb powiel: na monitorze wybierz 2. Monitor, wybierz Kilka monitorów → Powiel ten ekran → OK.
  • Seite 105 Manual Dodanie jednego dodatkowego monitora do oryginalnego monitora laptopa / tabletu Tryb gotowości / hibernacji oraz port Video - po aktywacji laptopa / tabletu w trybie gotowości / hibernacji wyświetlany jest główny (oryginalny) monitor, dlatego zaleca się używanie monitora, który jest zintegrowany z laptopem / tabletem głównego monitora, aby można było ponownie zalogować...
  • Seite 106 USB-C Quattro Display Docking Station with Power Delivery 85 W Steruj monitorem w systemie Windows 7 Steruj monitorem w systemie Windows 8 / 8.1 i Windows 10 ODINSTALOWANIE STEROWNIKÓW Przejdź do Panelu sterowania → Wszystkie elementy panelu sterowania → Programy i funkcje → Usuń: Oprogramowanie Core DisplayLink dla sterowników...
  • Seite 107 Manual Odinstalowanie sterowników KORZYSTANIE Z SYSTEMU MACOS Po podłączeniu monitora ekran na komputerze Mac będzie migotać, co jest warunkiem standardowym, po stabilizacji można wykonać standardowe ustawienie monitora: Preferencje systemowe - wyświetlanie:...
  • Seite 108 USB-C Quattro Display Docking Station with Power Delivery 85 W Kliknij Rozmieszczenie iw trybie domyślnym (Rozszerzony pulpit) kliknij nowy monitor i przeciągnij go w razie konieczności w stosunku do monitora Mac. Jeśli wybierzesz opcję Mirror, tryb zmieni się na powielony ekaran (rozdzielczość...
  • Seite 109 Manual Tryb lustra: ten tryb może być używany tylko wtedy, gdy jest obsługiwany przez komputer Mac Kliknij opcję Gather Windows: za pomocą tej opcji można wybrać ustawienia odpowiedniego monitora ­ skalowane (dostępne rozdzielczości), obrót (standard, 90 °, 180 ° i 270 °) i częstotliwość odświeżania (jeśli są oferowane). Poniższe opcje ustawień...
  • Seite 110: Inne Funkcje

    USB-C Quattro Display Docking Station with Power Delivery 85 W Wyświetl opcję 2 W trybie Skalowania kliknij odpowiednią ikonę, rozdzielczość zostanie wyświetlona poniżej (co wygląda tak: 3008x1692 = 4K@30Hz) Closed-display mode - możliwe jest monitorowanie podłączonego monitora, gdy monitor Mac jest zamknięty, ale musisz podłączyć zasilanie, a także podłączyć...
  • Seite 111: Instrukcje Bezpieczeństwa

    Zachowaj instrukcję obsługi w celu późniejszego wykorzystania. We współpracy z działem serwisowym: • Sprawdź, czy urządzenie nie jest uszkodzone. • Reklamuj / zgłoś nieprawidłowości gdy urządzenie nie działa zgodnie z instrukcją obsługi. CZĘSTO ZADAWANE PYTANIA Dostępne na naszych stronach www.i-tec.cz/pl/ w zakładce „FAQ“ przy niniejszym produkcie.
  • Seite 112 USB-C Quattro Display Docking Station with Power Delivery 85 W SLOVNÍK POJMOV • Rozhranie / port / konektor / vstup / slot – miesto, kde sa fyzicky prepájajú dve zariadenia. • Radič – polovodičová súčiastka (tzv. chipset) v notebooku, tablete, PC, zaisťujúca činnosť...
  • Seite 113 Manual USB-C DP Alt mode porty 2x DP DP 1.2 HBR2: 1 monitor – až 4K/30Hz 2 monitory – až 2x 1080p/60Hz DP 1.4 HBR3: 1 monitor – až 4K/60Hz 2 monitory – až 2x 1440p/60Hz DP 1.4 HBR3 DSC: 1 monitor –...
  • Seite 114 USB-C Quattro Display Docking Station with Power Delivery 85 W Predná strana: Prepínač On/Off pre zapnutie a vypnutie dokovacej stanice 1x 3.5 mm výstup pre mikrofón 1x 3.5 mm Audio výstup USB­C port gen. 1 (iba pre dáta) USB 3.0 port (5GB/s) s podporou funkcie Fast Charge (BC 1.2) Zadná...
  • Seite 115: Systémové Požiadavky

    Pred samotnou inštaláciou sa uistite, že máte v systéme nainštalované najnovšie ovládače pre vaše zariadenie a aktualizovaný BIOS. Pre Windows si ovládače stiahnite z nášho webu www.i-tec.cz/setup v záložke „Download“ pri tomto produkte. Spusťte inštaláciu zo stiahnutého súboru, zvoľte jazyk inštalácie a postupujte podľa pokynov na obrazovke.
  • Seite 116 USB-C Quattro Display Docking Station with Power Delivery 85 W HARDWAROVÁ INŠTALÁCIA (PRIPOJENIE DOKOVACEJ STANICE K NOTEBOOKU / TABLETU) Zapnite notebook / tablet a pripojte napájací adaptér k dokovacej stanici. Zapojte napájací adaptér dokovacej stanice do siete AC 110 V / 230 V a stlačte tlačidlo ON.
  • Seite 117 INŠTALÁCIA OVLÁDAČOV V ĎALŠÍCH OPERAČNÝCH SYSTÉMOCH Pre Android, Chrome OS a Ubuntu použite ovládače od výrobcu chipsetu DisplayLink. Tie si stiahnite na našom webe www.i-tec.cz/setup v záložke „Download“ pri tomto produkte alebo tu: http://www.displaylink.com/downloads. PRIPOJENIE HDMI / DISPLAY PORT MONITORA Pre pripojenie monitora k dokovacej stanici použite HDMI / DP kábel.
  • Seite 118 USB-C Quattro Display Docking Station with Power Delivery 85 W Voľby pre ovládanie monitora s pripojenou dokovacou stanicou Ad a) DisplayLink Manager – po zvolení sa zobrazí nainštalovaná verzia softwaru. Nainstalovaná verze softwaru Ad b) Nastavenie zvuku – umožní nastavenie zvuku (nastavenie je podobné...
  • Seite 119 Manual To je potom možné využiť pre nastavenie napr. Skype. Nastavenie zvuku pre Skype Ad c) Pokročilá konfigurácia – po kliknutí sa zobrazí nastavenie pro Rozlíšenie zobrazenia zo systému Windows. Rozlíšenie zobrazenia vo Windows 10 Môžete vykonať nastavenie Rozšíriť (Extend) a Zrkadliť / Duplikovať (Mirror): •...
  • Seite 120 USB-C Quattro Display Docking Station with Power Delivery 85 W Zaškrtnutím poľa „Nastaviť tento monitor ako hlavný“ si prídavný monitor zvolíte ako hlavný. Po kliknutí na druhý monitor a jeho posunutím si ho podľa potreby umiestnite voči pôvodnému monitoru vášho notebooku / tabletu.
  • Seite 121 Manual a Iba Projektor. Vo Windows 8 / 8.1 / 10 sú tu voľby: Iba obrazovka počítača, Duplikovať, Rozšíriť, Iba druhá obrazovka. Ovládanie monitora vo Windows 7 Ovládanie monitora vo Windows 8 / 8.1 a Windows 10 ODINŠTALOVANIE OVLÁDAČOV Štandardne postupujte cez Ovládacie panely → Všetky položky Ovládacích panelov →...
  • Seite 122 USB-C Quattro Display Docking Station with Power Delivery 85 W Odinštalovanie ovládačov POUŽITIE V MACOS X Po pripojení monitora bude obrazovka na Vašom Mac­u preblikávať, čo je štandardný stav, a ustálenie môžete vykonať štandardným nastavením tu: Predvoľ by systému-Monitory:...
  • Seite 123 Manual Kliknite na Usporiadanie a v defaultnom režime (Rozšíriť) kliknite na nový monitor a presuňte ho podľa potreby vzhľadom k monitoru Mac­u. Pri voľbe Zrkadliť monitory sa zmení režim na Zrkadliť (rozlíšenie monitorov sa automaticky upraví podľa ich parametrov a nastaví sa najvyššie možné rozlíšenie na oboch monitoroch).
  • Seite 124 USB-C Quattro Display Docking Station with Power Delivery 85 W Režim zrkadliť: Môžete použiť len v prípade, že je ponúkaný Macom. Kliknite na Zhromaždiť okná: touto voľbou si môžete zvoliť nastavenie odpovedajúceho monitora – Prispôsobené rozlíšenie (ponúka využiteľné rozlíšenie), Otočenie (Štandardné, 90°, 180° a 270°) a Obnovovacia frekvencia (ak je ponúkaná).
  • Seite 125 Manual Variant zobrazenia 2 V Prispôsobenom režime kliknite na Vami vybranú ikonku, pod obrazovkou sa zobrazí dané rozlíšenie (tu vzhľadovo 3008x1692 = 4K@30Hz) Režim zatvoreného displeja – práca na pripojenom externom monitore, keď je monitor Macu sklopený, je možná iba keď je Mac napájaný a je pripojená myš a klávesnica.
  • Seite 126: Bezpečnostné Pokyny

    V súčinnosti so servisným oddelením: • Overte funkčnosť po páde do vody alebo na zem. • Overte funkčnosť pri prasknutí krytu. • Reklamujte zariadenie nefungujúce podľa manuálu. ČASTO KLADENÉ OTÁZKY K dispozícii na našom webe www.i-tec.cz v záložke „FAQ“ pri tomto produkte.
  • Seite 127 Manual TERMINŲ ŽODINĖLIS • Sąsaja / prievadas / jungtis / įvestis / lizdas – vieta, kurioje fiziškai sujungiami du įrenginiai. • Valdiklis – puslaidininkių komponentas (t.v. chipset) nešiojamame kompiuteryje, planšetėje, PC, užtikrinantis nustatyto prievado veiklą. • USB-C / USB Type-C – tai nauja simetriška jungtis ir standartas, kurį USB­IF įdiegė...
  • Seite 128 USB-C Quattro Display Docking Station with Power Delivery 85 W DP 1.4 HBR3: 1 monitorius – iki 4K/60Hz 2 monitoriai – iki 2x 1440p/60Hz DP 1.4 HBR3 DSC: 1 monitorius – iki 5K/60Hz 2 monitoriai – iki 2x 4K/60Hz (Keturių monitorių derinys): Iki 2x 2048x1152/60Hz ir 2x 1440p/60Hz •...
  • Seite 129 Manual Priekinė dalis: Mygtukas On/Off doko stotelės įjungimui ir išjungimui 1 x 3.5mm Mic įvestis 1 x 3.5 mm Audio išvestis 1 x prievadas USB­C Gen. 1 (tik duomenų perdavimui) 1 x prievadas USB 3.0, (5GB/s), su greito įkrovimo palaikymu (BC 1.2) Užpakalinė...
  • Seite 130 USB-C Quattro Display Docking Station with Power Delivery 85 W Vaizdo išvesties reikalavimai: Įrenginys su laisvu USB­C prievadu palaikantis “DisplayPort Alternate Mode” arba su Thunderbolt™3 prievadu Operacinė sistema: Windows 10, macOS , Android, Linux su naujausiais atnaujinimais „macOS“ operacinė sistema nepalaiko „Multi Stream Transport“ (MST) vaizdo perdavimo technologijos, o tai reiškia, kad prisijungus prie „macOS“, tas pats...
  • Seite 131 (žr. komandą „Valdiklių išinstaliavimas“) ir instaliuokite iš naujo naujausius valdiklius, kuriuos galite atsisiųsti iš mūsų svetainės www.i-tec.cz „Download“ prie šio produkto. Po to vėl prijunkite doko stotelę prie nešiojamo kompiuterio/planšetės. Iškilus problemoms galite kreiptis į mūsų techninę pagalbą: support@itecproduct.com.
  • Seite 132 USB-C Quattro Display Docking Station with Power Delivery 85 W VALDIKLIŲ INSTALIACIJA KITOSE OPERACINĖSE SISTEMOSE Androidui Chrome OS ir Ubuntui naudokite gamintojo chipset DisplayLink valdiklius. Juos galite atsisiųsti iš mūsų svetainės www.i-tec.cz/setup, iš „Download“ prie šio produkto arba iš: http://www.displaylink.com/downloads.
  • Seite 133 Manual Ad a) DisplayLink Manager – atlikus parinktį bus rodoma instaliuota versija software. instaliuota software versija Ad b) Garso nustatymas – leidžia reguliuoti garsą (nustatymas panašus kaip Valdymo skydai → Garsas). Norėdami naudoti pasirinkite 2­kanalų ausines ir mikrofoną su 3.5 mm jack. Garso įrenginiuose nustatykite įvestį ir išvestį „DisplayLink Audio“...
  • Seite 134 USB-C Quattro Display Docking Station with Power Delivery 85 W Po to galima naudoti pvz. Skype nustatymui. Garso nustatymas Skype Ad c) Išplėstinė konfigūracija – paspaudus mygtuką bus rodomas nustatymas Raiškos rodymui Windows sistemoje. Raiškos rodymas Windows 10 Galima valdyti režimus Išplėsti (Extend) ir Atspindėti / Veidrodinis vaizdo fiksavimas (Mirror): •...
  • Seite 135 Manual Pažymėkite lauką „Nustatyti šį monitorių kaip pagrindinį“ papildomas monitorius pasirenkamas kaip pagrindinis. Paspauskite ties antruoju ekranu ir jį pertempkite, patalpinkite pagal poreikį Jūsų nešiojamame kompiuteryje / planšetėje. Vieno papildomo monitoriaus talpinimas nešiojamame kompiuteryje/planšetėje prie pradinio monitoriaus Standby / Hibernate režimas ir Vaizdo prievadas – po nešiojamo kompiuterio / planšetės aktyvavimo iš...
  • Seite 136 USB-C Quattro Display Docking Station with Power Delivery 85 W Su „Windows“ + P klaviatūra galima abu ekranus valdyti (Šis klaviatūros trumpinys yra funkcionalus programose nuo Windows 7 ir aukštesnėse). Monitoriaus naudojimui programoje Windows 7 čia yra šios parinktys: Tik kompiuteris, Dubliuoti, Išplėsti ir Tik Projektorius.
  • Seite 137 Manual Valdiklių išinstaliavimas DOKO STOTELĖ NAUDOJIMAS MACOS X Prijungus monitorių Jūsų Mac ekranas blyksės, tai yra standartinė būklė, nustojus blyksėti galima pradėti standartinius nustatymus čia: Parinktys sistemos-Monitoriai:...
  • Seite 138 USB-C Quattro Display Docking Station with Power Delivery 85 W Paspauskite ties Išdėstymas ir numatytame režime (Išplėsti) paspauskite ties nauju monitoriumi ir pertempkite jį į norimą vietą, atsižvelgiant į Mac monitorių. Pasirinkus komandą Atspindėti monitorius režimas pasikeis į režimą Atspindėti (monitorių...
  • Seite 139 Manual Režimas atspindėti: Galima naudoti tik tuo atveju, jeigu tai siūlo Mac. Paspauskite ties Surinkti langus: su šia komanda galite pasirinkti atitinkamo monitoriaus nustatymą – Pritaikyta raiška (siūlo naudotinas raiškas), Pasukimas (Standartinis, 90°, 180° ir 270°) ir Atnaujinimo dažnis (jeigu yra siūloma). Pagal naudojamą...
  • Seite 140: Kitos Funkcijos

    USB-C Quattro Display Docking Station with Power Delivery 85 W Vaizdo variantas 2 Pritaikytame režime paspauskite ties pasirinkta piktograma, po ekranu bus nurodoma raiška (čia 3008x1692 = 4K@30Hz) Uždaro ekrano režimas – darbas prijungtame išoriniame ekrane, kai ekranas Macu yra uždarytas, galimas tik tuo atveju, jeigu Mac yra maitinamas ir yra prijungta pelė...
  • Seite 141: Dažnai Užduodami Klausimai

    Bendradarbiaudami su servisu: • Patikrinkite veikimą po įkritimo į vandenį arba nukritimo ant žemės. • Įskilus dangčiui patikrinkite veikimą. • Jeigu įrenginys neveikia pateikite pretenzijas vadovaudamiesi įrenginio vadovu. DAŽNAI UŽDUODAMI KLAUSIMAI Rasite mūsų svetainėje: www.i-tec.cz/en/ skiltyje „FAQ“ prie šio produkto.
  • Seite 142 USB-C Quattro Display Docking Station with Power Delivery 85 W LIJST MET BEGRIPPEN • Interface / poort / connector / ingang / slot – plek, waar twee apparaten fysiek worden doorverbonden. • Controller – halfgeleideronderdeel (de zogenaamde chipset) in een laptop, tablet of pc, dat zorgt voor de werking van een van de poorten.
  • Seite 143 Manual USB-C DP Alt mode-poort 2x DP DP 1.2 HBR2: 1 monitor – tot 4K/30Hz 2 monitoren– tot 2x 1080p/60Hz DP 1.4 HBR3: 1 monitor – tot 4K/60Hz 2 monitoren – tot 2x 1440p/60Hz DP 1.4 HBR3 DSC: 1 monitor – tot 5K/60Hz 2 monitoren –...
  • Seite 144 USB-C Quattro Display Docking Station with Power Delivery 85 W Voorpaneel: On/Off-schakelaar om het dockingstation in en uit te schakelen 1x 3.5 mm Mic in 1x 3.5 mm Audio out 1x USB­C­poort gen. 1 (alleen gegevens) 1x USB 3.0­poort (5GB/s) with Fast Charge support (BC 1.2) Achterpaneel: Ingang voor voeding (DC 20.0V/6.75A)
  • Seite 145: Systeemvereisten

    BIOS op uw systeem is bijgewerkt. Download voor Windows de stuurprogramma's van onze site www.i-tec.cz/setup op het tabblad "Download" van dit product. Start de instal- latie door op het gedownloade bestand te klikken, selecteer de installatietaal en volg de instructies op het scherm.
  • Seite 146: Drivers Installeren In Macos

    USB-C Quattro Display Docking Station with Power Delivery 85 W HARDWARE-INSTALLATIE (DOCKINGSTATION AANSLUITEN OP EEN LAPTOP / TABLET) Schakel de notebook / tablet in en sluit de voedingsadapter aan op het dockingstation. Sluit de voedingsadapter van het dockingstation aan op een AC 110 V / 230 V netwerk en druk op de AAN-knop.
  • Seite 147 Gebruik voor Android, Chrome OS en Ubuntu de stuurprogramma’s van de fabrikant van de DisplayLink-chipset. Deze kunnen worden gedownload van onze website www.i-tec.cz/setup op het tabblad “Downloaden” voor dit product of hier: http://www.displaylink.com/downloads. AANSLUITING VAN EEN HDMI / DISPLAY POORT-MONITOR Gebruik een HDMI / DP-kabel om de monitor aan te sluiten op het dockingstation.
  • Seite 148 USB-C Quattro Display Docking Station with Power Delivery 85 W Hier kunt u dan kiezen: a) DisplayLink Manager b) Instelling van het geluid c) Geavanceerde configuratie Opties om de monitor te bedienen met het dockingstation aangesloten Ad a) DisplayLink Manager – indien geselecteerd, wordt de geïnstalleerde soft- wareversie weergegeven.
  • Seite 149 Manual Audio-instellingen Dit kan vervolgens worden gebruikt om bijvoorbeeld Skype in te stellen. Instelling van het geluid voor Skype Ad c) Geavanceerde configuratie – klik om de instellingen weer te geven voor de beeldschermresolutie van Windows. Monitorbediening in Windows 10...
  • Seite 150 USB-C Quattro Display Docking Station with Power Delivery 85 W U kunt de instellingen Uitbreiden (Extend) en Spiegelen/Dupliceren (Mirror) toepassen: • Spiegelen/Dupliceren (Mirror): selecteer op uw scherm de 2e Monitor, bij Meerdere Monitors → Dupliceer deze weergave → OK. •...
  • Seite 151 Manual Stand-by/slaapstand en videopoort - Wanneer de notebook/tablet wordt ingeschakeld vanuit de standby­/sluimerstand, wordt de primaire (monitor) monitor opnieuw weergegeven, dus we raden aan dat u de monitor die is geïntegreerd in uw laptop/tablet als primaire monitor gebruikt, zodat u zich opnieuw bij het systeem kunt aanmelden.
  • Seite 152: Gebruik In Macos

    USB-C Quattro Display Docking Station with Power Delivery 85 W BESTUURDERS VERWIJDEREN Ga naar Configuratiescherm → Alle items in het configuratiescherm → Programma’s en onderdelen → Verwijderen: DisplayLink Core Software voor videostuurprogramma’s. Bevestig uw keuzes tijdens het verwijderen. Stuurprogramma’s verwijderen GEBRUIK IN MACOS X Nadat de monitor is aangesloten, knippert het scherm van uw Mac even.
  • Seite 153 Manual Klik op Rangschikken en klik in de standaardmodus (Uitbreiden) op de nieuwe monitor en sleep deze naar wens naar de Mac-monitor. Wanneer Mirror- monitors is geselecteerd, verandert de modus in Mirror (de monitorresolutie wordt automatisch aangepast op basis van de parameters ervan en de hoogst mogelijke resolutie wordt op beide monitors ingesteld).
  • Seite 154 USB-C Quattro Display Docking Station with Power Delivery 85 W Uitbreidingsmodus: In deze modus kunt u de Hoofdmonitor selecteren door de menubalk te verslepen. Spiegelmodus: Deze kan alleen worden gebruikt als die door de Mac wordt aangeboden. Door Vensters rangschikken te selecteren, kunt u de juiste monitorinstellingen...
  • Seite 155 Manual (Standaard, 90°, 180° en 270°) en Beeldfrequentie (indien beschikbaar). Afhankelijk van de monitor die u gebruikt, hebt u de volgende instelmogelijkheden: Weergavemogelijkheid 1 Weergavemogelijkheid 2 Klik in Systeemvoorkeuren op het door u gekozen pictogram. Onder het beeldscherm wordt de gegeven resolutie getoond. (hier visueel 3008x1692 = 4K@30Hz)
  • Seite 156: Andere Functies

    USB-C Quattro Display Docking Station with Power Delivery 85 W Gesloten weergavemodus – werk op een aangesloten externe monitor terwijl de Mac-monitor neergeklapt is, is alleen mogelijk, als de Mac gevoed wordt en de muis en het toetsenbord aangesloten zijn. Meer informatie vindt u hier: https://support.apple.com/cs-cz/HT201834...
  • Seite 157: Veelgestelde Vragen

    Controleer de functionaliteit nadat de apparatuur in het water of op de grond is gevallen. • Controleer de functionaliteit als de behuizing beschadigd werd. • Reclameer apparatuur die niet volgens de handleiding werkt. VEELGESTELDE VRAGEN Beschikbaar op onze website www.i-tec.cz/nl op het tabblad “FAQ” bij dit product.
  • Seite 158: English

    EUROPEAN UNION ONLY NOTE: MARKING IS IN COMPLIANCE WITH EU WEEE DIRECTIVE ENGLISH This equipment is marked with the above recycling symbol. It means that at the end of the life of the equipment you must dispose of it separately at an appropriate collection point and not place it in the normal domestic unsorted waste stream.
  • Seite 159: Polski

    ČEŠTINA Toto zařízení je označeno výše uvedeným recyklačním symbolem. To znamená, že na konci doby života zařízení musíte zajistit, aby bylo uloženo odděleně na sběrném místě, zřízeném pro tento účel a ne na místech určených pro ukládání běžného netříděného komunálního odpadu. Přispěje to ke zlepšení stavu životního prostředí...
  • Seite 160 šiuo pareiškia, kad gaminys / verklaart hierbij dat het product Product, Bezeichnung, Le prénom, Producto, Prodotto, Název, Názov, Nazwa, Gaminys, Naam: i-tec USB-C Quattro Display Docking Station with Power Delivery 85 W Model, Modell, Modèle, Modelo, Modello, Model, Model, Model, Modelis, Model C31QUATTRODOCKPD Determination, Bestimmung, La détermination, Determinación, Determinazione,...
  • Seite 161 EC Directive 2014/30/EU, 2014/35/EU, 2009/125/ES, and 2011/65/EU EMS (For EMC, Für EMC, Pour la CEM, Para EMC, Per la compatibilità elettromagnetica, Pro EMC, Pre EMC, Dla Kompatybilności elektromagnetycznej, Skirtas EMC, Voor EMC): EN 55032:2015/AC:2016; EN 61000-3-2:2014; EN 61000-3-3:2013 EN 55035:2017 For Electrical Safety, Für die elektrische Sicherheit, Pour la sécurité...
  • Seite 162: Fcc

    This equipment has been tested and found to comply within the limits of a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. www.i-tec.cz/en...

Diese Anleitung auch für:

C31quattrodockpd

Inhaltsverzeichnis