Package Contents; System Requirements; Installing Drivers - i-tec C31DUALDOCKPD Gebrauchsanweisung

i-tec USB-C Dual Display MST Docking Station

PACKAGE CONTENTS

i-tec USB-C MST docking station
ź
USB-C cable (100 cm)
ź
Power adapter (output: DC 20V/5A, max.100W, DC cable 200 cm + network
ź
cable 200 cm)
Quick Start
ź

SYSTEM REQUIREMENTS

Hardware requirements: Requires a USB-C interface with support for the
"DisplayPort Alternate Mode" and "Power Delivery" (not all devices/systems with
USB-C have this standard) or Thunderbolt 3 port – now Windows 10 32/64bit, Mac
OS X, Chrome OS and Android 6 (Google) with Intel Broadwell Processors and R51
and higher
Operating system: Windows 10, Mac OS X, Google (Chrome OS and Android 6) with
latest updates
Note: macOS does not support MST (2 monitors in the extended mode).

INSTALLING DRIVERS

Once connected, the drivers for the docking station are automatically installed from
the system. In the case of the need to install LAN, download the latest drivers from
our web site www.i-tec-europe.eu in the tab "Download" for this product.
Notice: Before installing, make sure that the latest drivers for your device and
updated BIOS are installed in your system.
CONNECTING A DISPLAY PORT / HDMI MONITOR
The docking station is equipped with 1x Display Port 4K and 1x HDMI 4K port for
connecting an external monitor or projector with Display Port / HDMI interface. As
imaging equipment, advanced plasma and LCD monitors and TVs can be used.
Graphics chips, that are the "heart" of the docking station, support up to 1x 4K (Ultra
HD) resolution 3840 x 2160 pixels. To connect the monitor to the docking station,
use a high quality DP / HDMI cable. During the additional monitor installation, the
screen of the laptop, Mac, tablet or PC can blink, this is normal state.
EN
05