Product Parts; Power On/Off - Ksix Pulse Benutzerhandbuch

1.3 Product parts

1. Screen
2. Dial button
3. Strap button
1.4 How to attach and remove the straps
The straps of the Pulse are interchangeable. The shorter
strap must be placed in the display's top slot, while the
longer strap must be placed in the display's bottom slot.
Otherwise, the insertion system may be irreparably
damaged.
- To remove a strap: Hold the strap, press the button on the
back of the watch that corresponds to that strap, and slide
it to the left.
- To insert a strap: Hold the strap and then slide it to the right
until the strap is fully inserted into the watch body.
The straps have small metal pieces that must fit perfectly
inside the watch body rails.
1.5 Charging
The Pulse smartwatch's full charge time is approximately 2.5
hours, and the battery can last up to 7 days depending on
the usage.
Use the USB-A magnetic cable that is included in the box to
charge the smartwatch. Connect the USB-A connector to a
charger, computer output or power bank and place the
magnetic base in a way so that the two pins properly stick
to the back part of the body watch.

1.6 Power on/off

To turn on the smartwatch, press the dial for 3 seconds.
To turn off the smartwatch, long-press the dial button. 3
icons will appear.
smartwatch, the middle icon to restart it, and the one on the
bottom to return to the Main Menu.
You can also turn off the watch by swiping down on the
screen, accessing settings, tapping on "System" and "Turn
off".
1.7 About IP protection rating
The Pulse smartwatch has an IP68 protection rating in fresh
water.
Disclaimer: Although the watch has an IP68 protection
rating, we do not recommend direct and prolonged contact
with water, or use in saunas or steam baths. We do not
recommend swimming in the sea or in swimming pools (both
fresh and salt water). In the event that this happens, it is
recommended that the watch be rinsed with fresh water
after immersion, due to the corrosive effect of chlorine or
salt water. If the watch has an auto-drain function, it is also
recommended to use it after rinsing.
4. Charing thimble contacts
5. Green sensor light
Press the one above to turn off the