ECG RM 100 Lite White Bedienungsanleitung Seite 7

2. Place the detachable attachment on the body of the device and secure by twisting.
3. Uncoil the entire cord and plug into the outlet.
4. Insert the appliance into the mixing bowl containing food and press the desired speed button on the
upper part of the appliance body. Blend in circular motions from the bottom.
5. Release the button to stop the blender. Unplug the power cord from the outlet after you have finished
blending.
Note: The maximum continuous operation time of the appliance is 60 seconds when processing soft foods
and liquids and a maximum of 10 seconds for hard or solid foods processing, see the table below. The
minimum rest period between each switch-on is 1 minute. Do not switch on the appliance more than
three times in a row. Otherwise the appliance will overheat and become damaged.
INSTRUCTIONS FOR USE – CHOPPER
The chopper is designed to cut food such as meat, cheese, onions, herbs, garlic, carrots, nuts and almonds,
plums, etc.
Do not chop very hard food, such as ice cubes, nutmeg, coffee beans or grains.
Attention: The chopping blade is very sharp! Always hold it by the top plastic part.
1. Place the chopping blade on the shaft inside the chopping bowl. Always place the chopping bowl safely
on an anti-skid surface.
2. Insert the food into the bowl and apply the lid.
3. Place the body of the appliance on the lid of the chopping container and secure by turning.
4. During the chopping process, hold the appliance body with one hand and the chopping bowl with the
other.
5. After use, unplug the power cord from the outlet and twist to disconnect the body of the unit from the
container.
6. Then remove the lid of the bowl.
7. Remove the chopping blade carefully and take out the chopped food.
7